New ⊕ button on the recording screen toggles map auto-follow. When off,
the map stays put so you can look around when unsure where you are (off
the track, or the track leads where there is no road); new GPS points no
longer recentre it. Tapping it back on recentres on the current position
and resumes following. Default on per screen entry (not persisted).
Guards followMode around panTo/setView in onPoint/onBatchUpdate/
onStateChange. Independent of the compass freeze/rotate controls.
Stage B of the ridden-roads work. GPS.detectWalk() flags contiguous low-speed
runs (< walkDetectKmh, or the single-speed 30-rpm push speed, for >= walkMinRunSec)
as walking inside a bike/other ride. Persisted per point (gps_points.walk, via
DB.setWalkFlags in recalculateSession + recomputeAllStats). rebuild_roads maps a
walk point to atype 'walk' so it colours as walking and is not treated as a
rideable road. Track detail colours walk runs and shows 'пешком: N мин / X км'.
Verified detectWalk on real tracks: 98% on a mostly-pushed 4km ride vs 1% on a
normal 16km ride.
Stage 1 (pure JS). buildShareImage() draws a 9:16 story PNG: track shape (colored
glowing line), big Distance/Time/Speed + small elevation/kcal/date, on a
transparent or photo background. showShareModal() previews it with a
transparent/photo toggle and Share/Save buttons; a 'Похвастаться' button in the
track detail opens it. Native export (SAF save + share intent) and the settings
background picker come in Stage 2 (needs an APK rebuild); on desktop the export
buttons toast an error.
Stage 1 of the nogo/reroute work. Mark impassable circles that BRouter routes
around, end to end:
- DB nogo_areas table + CRUD; drawNogoAreas() red circles (tap to remove).
- BRouter.route(points, profile, nogos): &nogos=lon,lat,r on the RouteServer and
nogos in the embedded-engine request; Rust brouter_route passes it through;
Kotlin builds OsmNodeNamed(radius,isNogo,nogoWeight=NaN) -> rc.nogopoints +
prepareNogoPoints (needs an APK rebuild for offline use).
- Planner: ⛔ button toggles nogo-placement (tap map/line), each leg re-routes
around nogos. Recording map: ⛔ marks the current spot impassable. Detail map
shows the circles.
Verified the RouteServer detours around a nogo (2873m -> 3329m).
- Editor shows the route with casing + slope/elevation colouring like the detail
view (drawRoutePolyline over the routed geometry); day/night, slope/elev and
locate controls added. Root cause of the plain thin line: ele was dropped when
building leg geometry — now kept from BRouter, so casing/slope work here and in
showRouteDetail. Straight legs (no ele) stay a thin line.
- Insert a point is now a TAP on the line (fat invisible hit target,
pointer-events:stroke); long-press toggles road/straight.
- Routes store editable waypoints (routes.waypoints_json {waypoints,legMode})
alongside the dense geometry, so re-editing shows the 5-6 points, not thousands.
- Bottom bar reworked (.re-bottom): hint on top, buttons in a row, cancel below.
- Gap-fill is conservative: only real long dropouts (dt>60s, chord>150m), skips
big detours (>2x chord) and no-gain fills (road ~ straight).
Gap-fill (track detail): GPS.fillGaps now returns {points,gaps} with per-gap
status; the 🧩 control previews ONLY the filled dropouts (cyan casing; unfilled
= red dashed) with a Save/Cancel panel. Save is a reversible in-place patch
(estimated points added, original untouched; DB.saveGapFill/revertGapFill +
estimated/gap_filled columns), then recalculateSession. Revert removes them.
Route planner: renamed menu 'Нарисовать маршрут' → 'Нарисовать тренировку'
(it makes a workout session, not a route); routes empty-state now points at the
on-phone planner. showRouteEditor rewritten per-leg: each leg road (BRouter) or
straight independently, road by default, tap a leg to toggle it, long-press to
insert, silent straight fallback where no road; the global button sets all legs.
Manual pause (hand-paused at foot of a climb, walked up, resumed) was
counted as riding: computeStats bridged the GPS gap for distance and
elevRef survived the gap, leaking the on-foot climb into elevation gain.
- gps_sessions.pauses (JSON) now persists manual-pause intervals
- computeStats(opts.pauses): a segment crossing a pause is excluded
entirely (no distance/speed/elevation/kcal), elevRef reset, paused
time subtracted from duration; automatic GPS gaps still interpolated
- altitude glitch guard: an adjacent smoothed step steeper than
maxRealGradePct (100% = 45deg) is not banked and does not move elevRef
(covers Android no-fix 0.0); a smooth change to any value (a real 0
near a river) still passes
- recorder writes "alt":null when hasAltitude() is false (real fixed 0 kept)
- pauses threaded through live-stop, recalculateSession, recovery and bulk recompute
- new-tracks only (old tracks never stored pauses; no manual segment-cut UI)
Also: track-detail header shows a click-to-copy track ID.
