Separate BleBaroService so the HR strap and the barometer each hold their own GATT link and
work at the same time (one adapter, several LE connections). Verified on device against a PC
BlueZ emulator of the sensor: BleHR and BleBaro deliver in parallel, no cross-talk.
- BleBaroService: dedicated baro connection (scan-before-connect + direct-connect fallback,
ESS subscribe, writes ble_baro_data.json). MainActivity routes baro connects to it and
auto-connects both HR (ble_device.json) and baro (baro_device.json) at start.
- Rust: ble_baro_disconnect, ble_save_baro_device.
- Settings: a 'Датчики (BLE)' section - heart-rate and barometer as separate rows with their
own slots, bind/connect/unbind, and a live pressure/temperature/altitude readout.
- Tracking: altitude_baro_m stored per point, preferred in elevation stats (null without baro).
- Record screen: 'Высота' from the barometer (1 Hz, dot marker), temperature from the sensor.
- Fixes: direct-connect on scan timeout; Locale.US JSON (RU decimal comma broke the parse);
parsing routed by characteristic (baro no longer written into the pulse); VR/HR stop returns
to the tracks list instead of into details.
- tools/baro-sensor/emulate_baro.py: PC BlueZ peripheral that emulates the sensor for testing.
Emulator-verified only; real board still pending.
Self-made altitude sensor: ESP32-C3 SuperMini + BMP280 broadcasting pressure and
temperature over standard BLE Environmental Sensing. Read into baldav the same way as
the heart-rate strap (Kotlin BLE service -> file -> Rust -> JS), new device_type 'baro'.
- BleHrService: 'baro' type subscribes to ESS 0x181A (pressure 0x2A6D uint32 0.1 Pa,
temperature 0x2A6E int16 0.01 C), writes ble_baro_data.json + ble_baro_log.jsonl.
Every baro branch is gated by deviceType=='baro', so HR/GPS paths are untouched.
- ble.rs: BaroReading, ESS detection, ble_get_baro command (Android reads the file,
desktop returns None). Registered in lib.rs.
- frontend/js/baro.js: passive window.BARO - hypsometric pressure->altitude using the
sensor temperature, anchored to GPS altitude at ride start. Nothing runs until
BARO.start(), so with no barometer the app is unchanged.
- tools/baro-sensor: firmware (PlatformIO main.cpp + Arduino sketch) that reads BMP280
at max oversampling and advertises the ESS service.
Prep only: no hardware yet, verified by compile (build 0.1.538). Live wiring and
ride-track integration pending the board.
The strap's battery % is coarse/laggy (reads 100% for >24h), so to judge real
battery life we accumulate the time it actually delivered HR plus every battery
step into strap_uptime.json in the foreground service (persistent across
sessions). ble_read_strap_uptime / ble_reset_strap_uptime expose and reset it;
Settings shows hours-since-charge + steps with a Charged reset button.
The JS 2s poll that stored workout HR samples is frozen by Android when the
screen is off, so a sleep-long recording kept only the on-screen stretches
(the strap and live display were fine — the persist path was the gap). The
foreground service now appends every reading to ble_hr_log.jsonl; ble_read_hr_log
exposes it; on stop the workout rebuilds its samples from that log (falling back
to the poll array). ble_clear_hr truncates the log at start.
- BleHrService reads the standard Battery service (0x180F/0x2A19) 2.5s after
the HR subscribe and every 60s; writes 'bat' into ble_hr_data.json.
- HrReading gains battery: Option<u8> (serde alias 'bat').
- gps.js: the HR poll captures reading.battery; _checkBatteryAlert speaks
(speechSynthesis ru-RU) and beeps once at 10% and 5% (beep is the
guaranteed cue where TTS is absent), resetting above 15%.
- Workout screen shows the strap charge in its status line.
Recording auto-called ble_connect each ride, and the Kotlin service held a
GATT connect to an absent band (radio busy) plus START_STICKY churn -
draining the battery when the band was away or Bluetooth off.
- gps.js _startHrMonitor: drop the auto ble_connect; keep only the cheap HR
poll so a manual connect (now or mid-ride) lands HR in the track.
- Settings: a 'Подключить' button for the paired band, usable any time incl.
during a ride. BT off -> ble_request_enable (system enable dialog); on ->
ble_connect, start the poll if recording, report connected / not found.
- ble.rs: ble_request_enable command (+ handler registration).
- MainActivity: ble_request_enable -> ACTION_REQUEST_ENABLE (BLUETOOTH_CONNECT
already in manifest).
- BleHrService: START_NOT_STICKY; if the 5s scan doesn't find the address,
stopSelf instead of directConnect to an absent device.
GPS altitude: accel-based glitch filter (accel=0 + speed = GPS drift), altitude
jump >100m filter, timestamp sanity (>24h = remove). Per-point Crr from accel
vibration (smooth/mixed/gravel). Gap interpolation on map with dashed lines
when accel confirms movement. Walk/run separate speed limits (configurable).
Adaptive GPS accuracy (auto x2 when signal bad). Dead reckoning points when
GPS silent but accel shows movement. Locale.US fix for sensor JSON.
Sensors: accelerometer + gyroscope in GpsRecorderService (RMS, max, pitch, yaw).
Columns in gps_points. Dynamic addGpsPoint INSERT (safe if columns missing).
Manual routes: draw on map by tapping points, elevation from past tracks +
open-meteo API, realistic timestamps by activity speed. Manual sessions
skip glitch filtering on recalculate. Speed from GPS.config not hardcoded.
Water tracking: water_pct field in product add/edit forms, searchProducts
returns water_pct, "ml" label for liquids, recipe water from ingredients.
BMR: moving average weight (7 days), fixed charts using dailyBase not raw bmr.
BLE: ble_clear_hr on stop, recovery toast, serde alias for ts/timestamp.
Products: 217 Gridnev products (bakery, desserts, bread, ready meals).
Magnit scraper fix (NUXT_DATA name/value pairs, not indices). Supplements
addSupplement with all 41 columns. Nutrient fallback RDI includes omega/EPA/DHA.
Export/import: custom products + recipes + supplements in single JSON bundle.
Export all or single product. Dedup on import by name_lower + source.
OTA: router upload (LAN, always), VPS upload (-u flag). Kotlin checks router
first (2s timeout), then VPS. Update URL from update_info.json.
Session detail: renderToken prevents stale setTimeout callbacks after recalculate.
WAL disabled (PRAGMA journal_mode=DELETE).
