ui: bulk-delete tracks, HR/VR record + detail layout

- Tracks list: the long-press multi-select (used for merge) now also offers Удалить - bulk delete of the selected tracks (1+; merge still needs 2+), same selection flow. - HR/VR record screen: heart rate fills the main area (like the map on a GPS ride), Подключить/Стоп moved into a bottom bar, consistent with the GPS screen. - HR/VR workout detail: 'Удалить зарядку' pinned to the bottom (was floating in the scroll flow and stretched).
ble: barometer on its own connection - simultaneous HR+baro, auto-connect, UI
2026-10-30 23:07:53 +03:00 · 2026-10-30 22:46:26 +03:00 · 2026-10-30 00:38:12 +03:00 · 2026-10-27 21:47:10 +03:00
18 changed files with 1215 additions and 90 deletions
--- a/docs/session-logs/2026-10-30_barometer-ble-baldav.md
+++ b/docs/session-logs/2026-10-30_barometer-ble-baldav.md
@ -0,0 +1,51 @@
+# 2026-10-30 - BLE-барометр: сторона baldav
+
+## Контекст
+Делаем самодельный датчик высоты: ESP32-C3 SuperMini + BMP280, вещает давление и
+температуру по BLE (стандартный Environmental Sensing). Железо заказано, ещё едет.
+Прошивка датчика - в `tools/baro-sensor/` (PlatformIO + Arduino-скетч), схема сборки -
+`tools/baro-sensor/baro-guide.html`. Эта задача - прочитать датчик в baldav и считать высоту.
+
+## Что сделано
+Читаем барометр тем же путём, что и пульсометр (Kotlin BLE-сервис -> файл -> Rust -> JS),
+новым `device_type = "baro"`. Диспетчер команд (`MainActivity`) не менялся - тип проходит насквозь.
+
+- `BleHrService.kt`: тип `baro` - подписка на ESS (`0x181A`): давление `0x2A6D` (uint32, 0.1 Па)
+  и температура `0x2A6E` (int16, 0.01 C). Пишет `ble_baro_data.json` + `ble_baro_log.jsonl`.
+  Все ветки барометра под `deviceType == "baro"`; HR/GPS-пути не тронуты.
+- `ble.rs`: структура `BaroReading`, определение ESS, команда `ble_get_baro`
+  (Android читает файл; десктоп возвращает None). Зарегистрирована в `lib.rs`.
+- `frontend/js/baro.js`: ПАССИВНЫЙ модуль `window.BARO`. Гипсометрический пересчёт давления
+  в высоту с реальной температурой датчика, якорь к высоте GPS на старте. Ничего не исполняется,
+  пока не вызван `BARO.start()` - без барометра приложение работает как раньше.
+
+## Состояние
+Проверено компиляцией (сборка 0.1.538, без ошибок). На устройстве НЕ проверено - нет железа.
+
+## Продолжение того же дня: обвязка, UI, проверка эмулятором
+
+Железа ещё нет, поэтому эмулировали датчик на ПК (`tools/baro-sensor/emulate_baro.py` -
+BlueZ D-Bus GATT-сервер, вещает ESS `0x181A` с давлением/температурой), телефон читал его
+реальным путём. Проверено на устройстве: `BleHR: HR:70` и `BleBaro: Baro:... Pa` одновременно.
+
+Сделано:
+- `BleBaroService` - отдельный сервис/соединение для барометра, работает параллельно с
+  пульсометром (один адаптер держит несколько LE-связей). Баро-подключения маршрутизируются
+  в него из `MainActivity`. Авто-подключение при старте: баро из `baro_device.json`, пульс из
+  `ble_device.json` (оба сами цепляются).
+- Rust: `ble_baro_disconnect`, `ble_save_baro_device`. JS сохраняет baro-устройство при привязке.
+- Настройки: секция "Датчики (BLE)" - пульсометр и барометр раздельно, свои слоты и кнопки,
+  живой показ давления/температуры/высоты.
+- Трекинг: `altitude_baro_m` в точках, предпочитается в статистике высот (null без датчика).
+- Экран записи: "Высота" от барометра (обновление 1 Гц, пометка точкой), температура с датчика
+  (белая, с десятой).
+- Починки по пути: directConnect при таймауте скана; Locale.US в JSON (была запятая от RU-локали);
+  маршрутизация парсинга по характеристике (баро не писал в пульс); навигация после Стоп в VR/ЧСС
+  (на список, а не в детали).
+
+## Осталось (по приходу платы)
+- Активировать модуль: `BARO.start()` при подключении baro-устройства, задать `BARO.getGpsAlt`.
+- Привязать высоту барометра к треку поездки (в точки / поправка высот П.5).
+- UI: показать барометрическую высоту; выбор baro-устройства в scan-UI уже работает (тип проходит).
+- Ограничение: сервис держит одно BLE-соединение, поэтому барометр и пульсометр одновременно
+  пока нельзя - отдельный следующий шаг (две связи / второй сервис).
--- a/frontend/css/styles.css
+++ b/frontend/css/styles.css
@ -751,7 +751,12 @@ select {
 .full-width { width: 100%; }

 /* HR-only workout (зарядка) recording screen: big heart rate, timer, kcal, no map. */
-.workout-screen { padding: 24px 16px; display: flex; flex-direction: column; align-items: center; gap: 8px; }
+.workout-screen { display: flex; flex-direction: column; height: 100%; }
+.wk-main { flex: 1; display: flex; flex-direction: column; align-items: center; justify-content: center; gap: 4px; padding: 16px; }
+.wk-panel { flex-shrink: 0; display: flex; flex-direction: column; padding: 10px 16px; padding-bottom: calc(10px + var(--safe-area-bottom, 0px)); }
+/* Workout detail (in a modal): fill the scrollable body so the delete button sits at the bottom. */
+.wkd-wrap { display: flex; flex-direction: column; min-height: 100%; }
+.wkd-del { margin-top: auto; flex: none; align-self: stretch; }
 .wk-hr-big { font-size: 92px; font-weight: 700; line-height: 1; color: var(--primary); }
 .wk-hr-lbl { color: var(--muted); margin-top: -4px; }
 .wk-stats { display: flex; gap: 18px; margin: 14px 0; flex-wrap: wrap; justify-content: center; }
@ -1460,7 +1465,7 @@ body.dark-map .poi-badge { background: #111; border-color: #eee; }
  background: var(--surface);
 }
 .rec-topbar .rec-top { font-size: 27px; font-weight: 700; color: var(--on-surface); }
-.rec-topbar .rec-top-mid { color: var(--muted); }
+.rec-topbar .rec-top-mid { color: var(--on-surface); }

 .rec-lbl {
  font-size: 10px;
--- a/frontend/index.html
+++ b/frontend/index.html
@ -20,6 +20,7 @@
  <script src="lib/jszip.min.js"></script>
  <script src="lib/zxing-wasm.js"></script>
  <script src="js/db.js"></script>
+  <script src="js/baro.js"></script>
  <script src="js/bmr.js"></script>
  <script src="js/tilecache.js"></script>
  <script src="js/gps.js"></script>
--- a/frontend/js/baro.js
+++ b/frontend/js/baro.js
@ -0,0 +1,116 @@
+// Barometric altitude from the DIY BLE sensor "BaroBalDav" (ESP32-C3 + BMP280).
+// PASSIVE module: it only defines window.BARO. Nothing runs until BARO.start() is called, so with
+// no barometer connected the app behaves exactly as before. Activation (start on a "baro" connect,
+// plus the getGpsAlt hook) is wired in main.js only when a baro device is in use.
+//
+// How it works: the Kotlin BLE service writes the latest {pressure_pa, temp_c, ts} to a file; the
+// Rust command `ble_get_baro` returns it. We turn pressure into altitude with the hypsometric
+// formula using the sensor's own temperature, and anchor the absolute value to the GPS altitude at
+// ride start. The sensor is excellent for relative change (~1 m); weather drift of the absolute
+// baseline is handled by the GPS anchor (optionally re-anchored slowly).
+let BARO = {};
+(function () {
+  let R = 287.05;     // specific gas constant for dry air, J/(kg*K)
+  let G = 9.80665;    // standard gravity, m/s^2
+
+  let state = {
+    anchorPa: null,     // reference pressure at the anchor point
+    anchorAltM: null,   // absolute altitude (m) at the anchor point, from GPS
+    lastPa: null,       // most recent pressure, Pa
+    lastTempC: null,    // most recent chip temperature, C (for the hypsometric term)
+    lastTs: 0,          // unix seconds of the last reading
+    lastAltM: null,     // computed absolute altitude at the last reading
+    polling: false,
+    timer: null,
+  };
+  BARO.state = state;
+
+  // Height of a level at pressure `pa` above a level at pressure `refPa`, at air temperature tC.
+  // Hypsometric formula: dh = (R*T/g) * ln(refPa/pa). Measured temperature is used instead of a
+  // 15 C constant, so a hot or cold day does not bias the climb. Returns metres (positive = higher).
+  function deltaH(refPa, pa, tC) {
+    let T = (tC == null ? 15 : tC) + 273.15;
+    return (R * T / G) * Math.log(refPa / pa);
+  }
+  BARO.deltaH = deltaH;
+
+  // Pin the barometric altitude to a known absolute altitude (from GPS) at a given pressure.
+  // Call once at ride start; may be re-called later to slowly correct weather drift.
+  BARO.anchor = function (gpsAltM, pa) {
+    if (pa == null) pa = state.lastPa;
+    if (gpsAltM == null || pa == null) return false;
+    state.anchorAltM = gpsAltM;
+    state.anchorPa = pa;
+    state.lastAltM = BARO.altitude();
+    return true;
+  };
+
+  // Absolute altitude now = anchor altitude + barometric rise since the anchor. null until anchored.
+  BARO.altitude = function () {
+    if (state.anchorPa == null || state.lastPa == null) return null;
+    return state.anchorAltM + deltaH(state.anchorPa, state.lastPa, state.lastTempC);
+  };
+
+  // Fresh reading within 15 s?
+  BARO.isLive = function () {
+    return state.lastTs > 0 && (Date.now() / 1000 - state.lastTs) < 15;
+  };
+
+  // Override this to provide the current GPS altitude (m) for auto-anchoring; return null if no fix.
+  // Default: the altitude of the last recorded GPS point, if a recording is active.
+  BARO.getGpsAlt = function () {
+    try {
+      let pts = window.GPS && GPS.recording && GPS.recording.points;
+      if (pts && pts.length) {
+        let p = pts[pts.length - 1];
+        let a = p.altitude_srtm_m != null ? p.altitude_srtm_m : p.altitude;
+        return a != null ? a : null;
+      }
+    } catch (e) {}
+    return null;
+  };
+
+  async function tick() {
+    let r = null;
+    try { r = await window.__TAURI__.core.invoke("ble_get_baro"); } catch (e) {}
+    if (r && r.pressure_pa > 0) {
+      state.lastPa = r.pressure_pa;
+      if (r.temp_c != null) state.lastTempC = r.temp_c;
+      state.lastTs = r.timestamp || Math.floor(Date.now() / 1000);
+      // auto-anchor on the first good reading, once GPS has an altitude to anchor to
+      if (state.anchorPa == null) {
+        let g = null;
+        try { g = BARO.getGpsAlt(); } catch (e) {}
+        if (g != null) BARO.anchor(g, state.lastPa);
+      }
+      state.lastAltM = BARO.altitude();
+    }
+  }
+  BARO.tick = tick;
+
+  // Begin polling the sensor (~1 Hz). No-op if already running. Call this only when a baro device
+  // is connected, so the app does nothing extra when no barometer is in use.
+  BARO.start = function () {
+    if (state.polling) return;
+    state.polling = true;
+    let loop = async function () {
+      if (!state.polling) return;
+      await tick();
+      if (state.polling) state.timer = setTimeout(loop, 1000); // 1 s poll interval (a real delay)
+    };
+    loop();
+  };
+
+  BARO.stop = function () {
+    state.polling = false;
+    if (state.timer) { clearTimeout(state.timer); state.timer = null; }
+  };
+
+  // Clear the anchor and readings (e.g. between rides) so the next ride re-anchors fresh.
+  BARO.reset = function () {
+    state.anchorPa = null; state.anchorAltM = null;
+    state.lastPa = null; state.lastTempC = null; state.lastTs = 0; state.lastAltM = null;
+  };
+
+  window.BARO = BARO;
+})();
--- a/frontend/js/db.js
+++ b/frontend/js/db.js
@ -745,6 +745,7 @@ async function addGpsPoint(sessionId, ts, lat, lon, altGps, speedMs, seq, bleDat
    ["accel_rms", sensorData?.accel_rms], ["accel_max", sensorData?.accel_max],
    ["gyro_pitch", sensorData?.gyro_pitch], ["gyro_yaw", sensorData?.gyro_yaw],
    ["bearing_deg", sensorData?.bearing], ["accuracy_m", sensorData?.accuracy],
+    ["altitude_baro_m", sensorData?.altitude_baro_m],
  ];
  for (const [col, val] of extra) {
    if (_gpsPointCols.has(col)) { cols.push(col); vals.push(val ?? null); }
@ -1676,6 +1677,7 @@ async function runMigrations() {
  if (!gpsCols.includes("gyro_yaw")) await execute("ALTER TABLE gps_points ADD COLUMN gyro_yaw REAL");
  if (!gpsCols.includes("bearing_deg")) await execute("ALTER TABLE gps_points ADD COLUMN bearing_deg REAL");
  if (!gpsCols.includes("accuracy_m")) await execute("ALTER TABLE gps_points ADD COLUMN accuracy_m REAL");
+  if (!gpsCols.includes("altitude_baro_m")) await execute("ALTER TABLE gps_points ADD COLUMN altitude_baro_m REAL"); // barometric altitude from the BLE sensor (null without it)
  if (!gpsCols.includes("lat_smoothed")) await execute("ALTER TABLE gps_points ADD COLUMN lat_smoothed REAL");
  if (!gpsCols.includes("lon_smoothed")) await execute("ALTER TABLE gps_points ADD COLUMN lon_smoothed REAL");
  if (!gpsCols.includes("estimated")) await execute("ALTER TABLE gps_points ADD COLUMN estimated INTEGER DEFAULT 0"); // gap-fill (BRouter) points, reversible
--- a/frontend/js/gps.js
+++ b/frontend/js/gps.js
@ -311,7 +311,8 @@ GPS.computeStats = function(points, weightKg, opts) {
  // e.g. [45, 45, 52, 45, 45] — the 52 is a GPS altitude glitch.
  // Prefer terrain (SRTM/open-elevation) altitude when available — GPS altitude is noisy
  // and the stuck-filter destroys its real signal. Terrain is clean and accurate for slope.
-  const rawAlt = sorted.map(p => p.altitude_srtm_m ?? p.altitude ?? p.altitude_gps_m ?? null);
+  // Prefer the barometer (best for real climbs/descents) when present, then terrain (SRTM), then GPS.
+  const rawAlt = sorted.map(p => p.altitude_baro_m ?? p.altitude_srtm_m ?? p.altitude ?? p.altitude_gps_m ?? null);
  const filteredAlt = rawAlt.slice();
  for (let i = 1; i < filteredAlt.length - 1; i++) {
    if (filteredAlt[i] == null) continue;
@ -1170,6 +1171,15 @@ GPS.recoverFromFiles = async function(onProgress) {
 // live marker — the same fix is never written twice with different timestamps.
 GPS._processIncomingPoint = async function(p, fromNative) {
  if (!GPS.recording.active) return;
+
+  // Attach barometric altitude to this point when the BLE baro sensor is live and anchored.
+  // Null without a barometer, so elevation stats fall back to GPS/SRTM exactly as before.
+  try {
+    if (window.BARO && BARO.isLive()) {
+      let ba = BARO.altitude();
+      if (ba != null && isFinite(ba)) p.altitude_baro_m = ba;
+    }
+  } catch (e) {}
  // DB writes come only from the source of truth: native points on Android, or
  // watchPosition on desktop (no native service).
  const writeDb = !!fromNative || !GPS.recording.nativeService;
--- a/frontend/js/main.js
+++ b/frontend/js/main.js
@ -1364,6 +1364,7 @@ function showFoodModal() {
        amountG = Math.round(rawAmount * selectedUnit.grams_per_unit * 10) / 10;
      }
      await DB.addFoodEntry(state.date, time, selectedProduct.id, amountG, null, unitId, unitAmount);
+      hydrationOnDrink(); // if it was liquid, quiet the reminder once you've drunk
    } else {
      let desc = overlay.querySelector("#m-desc").value.trim();
      if (!desc) return false;
@ -1850,6 +1851,7 @@ async function renderProducts(container) {
      let note   = overlay.querySelector("#m-note").value.trim() || null;
      if (isNaN(amount) || amount <= 0) return false;
      await DB.addFoodEntry(state.date, time, productId, amount, note);
+      hydrationOnDrink(); // quiet the drink reminder if this was liquid
    });
  }

@ -2824,23 +2826,46 @@ let gpsMarker = null;
 // At session start, seed the native hydration deficit from the FOOD LOG: how far behind on water
 // you are for the time of day (need-so-far minus logged intake). During the session the native
 // service adds sweat on top. Intake comes from what you log, not a button.
-async function seedHydrationDeficit() {
+// Sweat (extra water loss) per activity — cycling sweats far more than a walk, so a walk must
+// NOT accrue the ride rate (that made it falsely hit the threshold after ~1 h of walking).
+let HYDR_SWEAT = { bike: 600, walk: 200, run: 450, workout: 250, vr: 250 };
+function hydrSweatFor(type) { return HYDR_SWEAT[type] || 600; }
+
+// Compute the current sedentary shortfall (need-so-far for the time of day minus what you've
+// logged drinking today). Shared by the session seed and the on-drink re-seed.
+async function hydrBaseDeficit() {
+  let target = parseInt(state.profile?.daily_water_ml) || 2000;
+  let now = new Date();
+  let nowMin = now.getHours() * 60 + now.getMinutes();
+  let wakeStart = 7 * 60, wakeEnd = 23 * 60; // assume waking 07:00–23:00
+  let frac = Math.max(0, Math.min(1, (nowMin - wakeStart) / (wakeEnd - wakeStart)));
+  let intake = await DB.getDailyWaterMl(now.toISOString().slice(0, 10));
+  return Math.max(0, Math.min(5000, Math.round(target * frac - intake)));
+}
+
+async function seedHydrationDeficit(activityType) {
  if (localStorage.getItem("baldav_hydr_on") === "0") return; // ON by default unless turned off
  try {
-    let target = parseInt(state.profile?.daily_water_ml) || 2000;
-    let now = new Date();
-    let nowMin = now.getHours() * 60 + now.getMinutes();
-    let wakeStart = 7 * 60, wakeEnd = 23 * 60; // assume waking 07:00–23:00
-    let frac = Math.max(0, Math.min(1, (nowMin - wakeStart) / (wakeEnd - wakeStart)));
-    let needSoFar = target * frac;
-    let intake = await DB.getDailyWaterMl(now.toISOString().slice(0, 10));
-    let startDeficit = Math.max(0, Math.min(5000, Math.round(needSoFar - intake)));
+    let startDeficit = await hydrBaseDeficit();
    let alertMl = parseInt(localStorage.getItem("baldav_hydr_alert")) || 600;
    await window.__TAURI__.core.invoke("set_hydration_config",
-      { enabled: true, alertMl, sweatMlPerHour: 600, reAlertMin: 15, startDeficitMl: startDeficit });
+      { enabled: true, alertMl, sweatMlPerHour: hydrSweatFor(activityType), reAlertMin: 15, startDeficitMl: startDeficit, seedSeq: Date.now() });
  } catch (e) { console.error("seedHydration", e); }
 }

+// After you log a drink DURING a session: recompute the base deficit (now lower) and push it with
+// a fresh seedSeq so the native side drops baseDeficit — the reminder goes quiet once you've drunk.
+async function hydrationOnDrink() {
+  try {
+    if (!(GPS.recording && GPS.recording.active)) return; // only matters during a session
+    if (localStorage.getItem("baldav_hydr_on") === "0") return;
+    let base = await hydrBaseDeficit();
+    let alertMl = parseInt(localStorage.getItem("baldav_hydr_alert")) || 600;
+    await window.__TAURI__.core.invoke("set_hydration_config",
+      { enabled: true, alertMl, sweatMlPerHour: hydrSweatFor(GPS.recording.activityType), reAlertMin: 15, startDeficitMl: base, seedSeq: Date.now() });
+  } catch (e) {}
+}
+
 async function renderGpsScreen(container) {
  // Check Bluetooth state if BLE device is paired
  let bleAddr = await DB.getProfileValue("ble_device_addr");
@ -2909,6 +2934,7 @@ async function renderGpsScreen(container) {
      <div id="gps-sel-bar" class="gps-sel-bar" hidden>
        <span id="gps-sel-count">Выбрано 0</span>
        <button id="gps-sel-merge" class="btn-primary" disabled>Объединить</button>
+        <button id="gps-sel-delete" class="btn-secondary" style="color:#cf6679" disabled>Удалить</button>
        <button id="gps-sel-cancel" class="btn-secondary">Отмена</button>
      </div>
    </div>`;
@ -2955,7 +2981,7 @@ async function renderGpsScreen(container) {
        heightCm: parseFloat(state.profile?.height_cm) || 178,
      } : null;
      await GPS.startRecording(type, wkg, hrProfile);
-      seedHydrationDeficit();
+      seedHydrationDeficit(type);
      renderScreen("recording");
    }
  };
@ -2966,11 +2992,13 @@ async function renderGpsScreen(container) {
  let selBar = container.querySelector("#gps-sel-bar");
  let selCount = container.querySelector("#gps-sel-count");
  let selMergeBtn = container.querySelector("#gps-sel-merge");
+  let selDeleteBtn = container.querySelector("#gps-sel-delete");
  let refreshSel = () => {
    container.querySelectorAll(".gps-session-item").forEach(it => it.classList.toggle("selected", selected.has(it.dataset.sid)));
    if (selBar) selBar.hidden = !selMode;
    if (selCount) selCount.textContent = "Выбрано " + selected.size;
-    if (selMergeBtn) selMergeBtn.disabled = selected.size < 2;
+    if (selMergeBtn) selMergeBtn.disabled = selected.size < 2; // merge needs 2+
+    if (selDeleteBtn) selDeleteBtn.disabled = selected.size < 1; // delete works from 1
  };
  let exitSel = () => { selMode = false; selected.clear(); refreshSel(); };
  let toggleSel = (sid) => {
@ -3035,6 +3063,27 @@ async function renderGpsScreen(container) {
      selMergeBtn.disabled = false; selMergeBtn.textContent = "Объединить";
    }
  };
+  if (selDeleteBtn) selDeleteBtn.onclick = async () => {
+    if (selected.size < 1) return;
+    let ids = [...selected];
+    let n = ids.length;
+    let word = (n % 10 === 1 && n % 100 !== 11) ? "трек"
+      : (n % 10 >= 2 && n % 10 <= 4 && (n % 100 < 10 || n % 100 >= 20)) ? "трека" : "треков";
+    if (!(await appConfirm(`Удалить ${n} ${word}? Это необратимо.`, "Удалить"))) return;
+    try {
+      selDeleteBtn.disabled = true; selDeleteBtn.textContent = "Удаляю...";
+      let done = 0;
+      for (let id of ids) {
+        try { await DB.deleteGpsSession(id); done++; } catch (e) { console.error("[bulk delete]", id, e); }
+      }
+      showToast(`Удалено: ${done}`);
+      exitSel();
+      renderScreen("gps");
+    } catch (e) {
+      showToast("Ошибка удаления: " + (e.message || e));
+      selDeleteBtn.disabled = false; selDeleteBtn.textContent = "Удалить";
+    }
+  };

  // Pagination: "Показать ещё" loads the next page from the DB and appends it.
  let sessOffset = sessions.length;
@ -4752,6 +4801,7 @@ function renderWorkoutDetail(session) {
  let max = hrs.length ? Math.max(...hrs) : null;
  let kcal = Math.round(session.total_kcal || 0);
  let html = `
+    <div class="wkd-wrap">
    <div class="sd-section"><div class="sd-title">${session.activity_type === "vr" ? "Руки/VR" : "Зарядка"} · ${session.date} ${session.start_time ?? ""}</div>
      <div class="sd-row">
        <div class="sd-stat"><span class="sd-val">${GPS.formatDuration(durSec)}</span><span class="sd-lbl">Время</span></div>
@ -4765,7 +4815,8 @@ function renderWorkoutDetail(session) {
    <div class="sd-section"><div class="sd-title">Пульс</div>
      <div class="chart-wrap"><canvas id="wk-hr-chart" height="150"></canvas></div>
    </div>
-    <button id="wk-del" class="btn-secondary full-width" style="margin-top:8px;color:#cf6679">Удалить зарядку</button>`;
+    <button id="wk-del" class="btn-secondary full-width wkd-del" style="color:#cf6679">Удалить зарядку</button>
+    </div>`;
  showModal(html, () => {}, (overlay) => {
    let ctx = overlay.querySelector("#wk-hr-chart");
    if (ctx && samples.length) {
@ -4792,17 +4843,21 @@ function renderWorkoutDetail(session) {
 function renderWorkoutInline(container) {
  container.innerHTML = `
    <div class="workout-screen">
-      <div class="wk-hr-big" id="wk-hr">--</div>
-      <div class="wk-hr-lbl">уд/мин</div>
-      <div class="wk-stats">
-        <div class="wk-stat"><span id="wk-time" class="wk-val">0:00</span><span class="wk-lbl">Время</span></div>
-        <div class="wk-stat"><span id="wk-kcal" class="wk-val">0</span><span class="wk-lbl">ккал</span></div>
-        <div class="wk-stat"><span id="wk-avg" class="wk-val">--</span><span class="wk-lbl">средний</span></div>
-        <div class="wk-stat"><span id="wk-max" class="wk-val">--</span><span class="wk-lbl">макс</span></div>
+      <div class="wk-main">
+        <div class="wk-hr-big" id="wk-hr">--</div>
+        <div class="wk-hr-lbl">уд/мин</div>
+        <div class="wk-status" id="wk-status">Подключите пульсометр</div>
+      </div>
+      <div class="wk-panel">
+        <div class="wk-stats">
+          <div class="wk-stat"><span id="wk-time" class="wk-val">0:00</span><span class="wk-lbl">Время</span></div>
+          <div class="wk-stat"><span id="wk-kcal" class="wk-val">0</span><span class="wk-lbl">ккал</span></div>
+          <div class="wk-stat"><span id="wk-avg" class="wk-val">--</span><span class="wk-lbl">средний</span></div>
+          <div class="wk-stat"><span id="wk-max" class="wk-val">--</span><span class="wk-lbl">макс</span></div>
+        </div>
+        <button id="wk-connect" class="btn-secondary full-width">Подключить пульсометр</button>
+        <button id="wk-stop" class="btn-primary gps-rec recording full-width">Стоп</button>
      </div>
-      <div class="wk-status" id="wk-status">Подключите пульсометр</div>
-      <button id="wk-connect" class="btn-secondary full-width">Подключить пульсометр</button>
-      <button id="wk-stop" class="btn-primary gps-rec recording full-width">Стоп</button>
    </div>`;

  let hrEl = container.querySelector("#wk-hr"), timeEl = container.querySelector("#wk-time");
@ -4846,8 +4901,8 @@ function renderWorkoutInline(container) {
    let res = await GPS.stopRecording();
    if (res && res.sessionId) {
      showToast(`Зарядка: ${res.kcal} ккал, ${GPS.formatDuration(res.durationSec)}, пульс ${res.avgHr ?? "--"}/${res.maxHr ?? "--"}`);
-      showSessionDetail(res.sessionId);
-    } else { renderScreen("gps"); }
+    }
+    renderScreen("gps"); // back to the tracks list after stop, like a GPS ride (not into details)
  };
 }

@ -5445,9 +5500,10 @@ async function renderRecordingInline(container) {
      let median = sorted[Math.floor(sorted.length / 2)] || 0;
      if (spdEl) spdEl.textContent = median.toFixed(1);

-      // Elevation
-      let alt = p.altitude;
-      if (alt != null && elevEl) elevEl.textContent = Math.round(alt) + " м";
+      // Elevation - prefer the live barometer (smoother, tracks real climbs) over noisy GPS altitude
+      let baroAlt = (window.BARO && BARO.isLive()) ? BARO.altitude() : null;
+      let alt = (baroAlt != null) ? baroAlt : p.altitude;
+      if (alt != null && elevEl) elevEl.textContent = Math.round(alt) + (baroAlt != null ? " м·" : " м");

      // Pause indicator
      if (GPS.recording.pauseStart) {
@ -5481,6 +5537,14 @@ async function renderRecordingInline(container) {
      // Update clock
      let clockEl = document.querySelector("#rec-clock");
      if (clockEl) clockEl.textContent = new Date().toTimeString().slice(0, 5);
+      // Barometer readout at 1 Hz, independent of GPS fixes (so altitude/temp move smoothly).
+      if (window.BARO && BARO.isLive()) {
+        let ba = BARO.altitude();
+        if (ba != null && elevEl) elevEl.textContent = Math.round(ba) + " м·"; // trailing dot = from the barometer
+        let tc = BARO.state ? BARO.state.lastTempC : null;
+        let tEl = document.querySelector("#rec-temp");
+        if (tc != null && tEl) tEl.textContent = tc.toFixed(1) + "°"; // one decimal: visibly live + has the dot
+      }
    }, 1000);

    // Fetch temperature — try multiple APIs (mobile internet blocks foreign services)
@ -7781,18 +7845,34 @@ async function renderSettings(container) {
      </div>

      <div class="settings-section">
-        <div class="settings-section-title">Пульсометр (BLE)</div>
+        <div class="settings-section-title">Датчики (BLE)</div>
        <div class="settings-item" id="s-ble-device">
          <div class="settings-item-left">
-            <div class="settings-item-title" id="s-ble-name">${state.profile.ble_device_name || "Не привязан"}</div>
-            <div class="settings-item-desc" id="s-ble-status">${state.profile.ble_device_addr ? state.profile.ble_device_addr : "Нажмите для поиска"}</div>
+            <div class="settings-item-title">Пульсометр: <span id="s-ble-name">${state.profile.ble_device_name || "не привязан"}</span></div>
+            <div class="settings-item-desc" id="s-ble-status">${state.profile.ble_device_addr ? state.profile.ble_device_addr : "найдите в поиске ниже"}</div>
          </div>
          <div style="display:flex;gap:6px">
            ${state.profile.ble_device_addr ? `<button id="s-ble-unbind" style="padding:6px 12px;font-size:13px;background:#cf6679;color:#fff;border:none;border-radius:4px">Отвязать</button>` : ""}
            ${state.profile.ble_device_addr ? `<button class="btn-primary" id="s-ble-connect" style="padding:6px 12px;font-size:13px">Подключить</button>` : ""}
-            <button class="btn-primary" id="s-ble-scan" style="padding:6px 12px;font-size:13px">Поиск</button>
          </div>
        </div>
+        <div class="settings-item" id="s-baro-device">
+          <div class="settings-item-left">
+            <div class="settings-item-title">Барометр высоты: <span id="s-baro-name">${state.profile.baro_device_name || "не привязан"}</span></div>
+            <div class="settings-item-desc" id="s-baro-status">${state.profile.baro_device_addr ? state.profile.baro_device_addr : "найдите в поиске ниже"}</div>
+          </div>
+          <div style="display:flex;gap:6px">
+            ${state.profile.baro_device_addr ? `<button id="s-baro-unbind" style="padding:6px 12px;font-size:13px;background:#cf6679;color:#fff;border:none;border-radius:4px">Отвязать</button>` : ""}
+            ${state.profile.baro_device_addr ? `<button class="btn-primary" id="s-baro-connect" style="padding:6px 12px;font-size:13px">Подключить</button>` : ""}
+          </div>
+        </div>
+        <div class="settings-item">
+          <div class="settings-item-left">
+            <div class="settings-item-title">Поиск устройств</div>
+            <div class="settings-item-desc">Пульсометр и барометр привяжутся каждый в свою строку. Пока работает одно BLE-подключение за раз.</div>
+          </div>
+          <button class="btn-primary" id="s-ble-scan" style="padding:6px 12px;font-size:13px">Поиск</button>
+        </div>
        <div id="s-ble-results" style="padding:0 14px"></div>
        <label class="settings-item" style="cursor:pointer">
          <div class="settings-item-left"><div class="settings-item-title">Не спрашивать про Bluetooth</div>
@ -8247,6 +8327,69 @@ async function renderSettings(container) {
    bleConnectBtn.disabled = false; bleConnectBtn.textContent = "Подключить";
  };

+  // --- Barometer (altitude sensor): its own bind/connect, separate from the heart-rate strap ---
+  let baroReadoutOn = false;
+  function startBaroReadout() {
+    if (baroReadoutOn) return;
+    baroReadoutOn = true;
+    let anchorPa = null;
+    let loop = () => {
+      let st = container.querySelector("#s-baro-status");
+      if (!st) { baroReadoutOn = false; return; } // left the settings screen
+      let s = window.BARO ? BARO.state : null;
+      let pa = s ? s.lastPa : null, tc = s ? s.lastTempC : null;
+      if (pa) {
+        if (anchorPa == null) anchorPa = pa;
+        let rel = BARO.deltaH(anchorPa, pa, tc);
+        st.textContent = `${(pa / 100).toFixed(1)} гПа${tc != null ? " · " + tc.toFixed(1) + " C" : ""} · высота ${rel >= 0 ? "+" : ""}${rel.toFixed(1)} м (отн. подключения)`;
+      } else {
+        st.textContent = "подключение, ждём данные...";
+      }
+      if (baroReadoutOn) setTimeout(loop, 2000);
+    };
+    loop();
+  }
+
+  let baroUnbindBtn = container.querySelector("#s-baro-unbind");
+  if (baroUnbindBtn) baroUnbindBtn.onclick = async () => {
+    await DB.setProfileValue("baro_device_addr", "");
+    await DB.setProfileValue("baro_device_name", "");
+    state.profile.baro_device_addr = "";
+    state.profile.baro_device_name = "";
+    try { if (window.BARO) { BARO.stop(); BARO.reset(); } } catch {}
+    baroReadoutOn = false;
+    try { await window.__TAURI__.core.invoke("ble_save_baro_device", { address: "" }); } catch {}
+    try { await window.__TAURI__.core.invoke("ble_baro_disconnect"); } catch {}
+    let nm = container.querySelector("#s-baro-name"); if (nm) nm.textContent = "не привязан";
+    let st = container.querySelector("#s-baro-status"); if (st) st.textContent = "найдите в поиске ниже";
+    baroUnbindBtn.remove();
+  };
+
+  let baroConnectBtn = container.querySelector("#s-baro-connect");
+  if (baroConnectBtn) baroConnectBtn.onclick = async () => {
+    let addr = state.profile.baro_device_addr;
+    if (!addr) return;
+    let bt = "on"; try { bt = await window.__TAURI__.core.invoke("ble_check_bluetooth"); } catch {}
+    if (bt === "off") { try { await window.__TAURI__.core.invoke("ble_request_enable"); } catch {} showToast("Включите Bluetooth, затем «Подключить»"); return; }
+    if (bt === "no_adapter") { showToast("Bluetooth недоступен"); return; }
+    baroConnectBtn.disabled = true; baroConnectBtn.textContent = "...";
+    let st = container.querySelector("#s-baro-status"); if (st) st.textContent = "Подключение...";
+    try {
+      await window.__TAURI__.core.invoke("ble_connect", { address: addr, deviceType: "baro" });
+      try { await window.__TAURI__.core.invoke("ble_save_baro_device", { address: addr }); } catch {}
+      try { if (window.BARO) { BARO.reset(); BARO.start(); } } catch {}
+      startBaroReadout();
+      showToast("Барометр: подключение...");
+    } catch (e) {
+      if (st) st.textContent = "ошибка подключения";
+      showToast("Ошибка: " + (e.message || e));
+    }
+    baroConnectBtn.disabled = false; baroConnectBtn.textContent = "Подключить";
+  };
+
+  // already-bound barometer that is still polling: resume its live readout on opening settings
+  if (state.profile.baro_device_addr && window.BARO && BARO.state && BARO.state.polling) startBaroReadout();
+
  let dontAskBt = container.querySelector("#s-dontask-bt");
  if (dontAskBt) dontAskBt.onchange = () => { try { localStorage.setItem("baldav_dontask_bt", dontAskBt.checked ? "1" : "0"); } catch {} };
  let dontAskGps = container.querySelector("#s-dontask-gps");
@ -8312,17 +8455,27 @@ async function renderSettings(container) {
              item.querySelector(".settings-item-desc").textContent = "Подключение...";
              try {
                await window.__TAURI__.core.invoke("ble_connect", { address: addr, deviceType: type });
-                await DB.setProfileValue("ble_device_addr", addr);
-                await DB.setProfileValue("ble_device_type", type);
-                await DB.setProfileValue("ble_device_name", name);
-                // Write file for Kotlin to read at GPS start
-                try { await window.__TAURI__.core.invoke("ble_save_device", { address: addr, deviceType: type }); } catch {}
-                state.profile.ble_device_addr = addr;
-                state.profile.ble_device_type = type;
-                state.profile.ble_device_name = name;
-                container.querySelector("#s-ble-name").textContent = name;
-                container.querySelector("#s-ble-status").textContent = addr + " (подключён)";
-                bleResults.innerHTML = "";
+                if (type === "baro") {
+                  // barometer -> its own slot, so it doesn't overwrite the heart-rate strap
+                  await DB.setProfileValue("baro_device_addr", addr);
+                  await DB.setProfileValue("baro_device_name", name);
+                  state.profile.baro_device_addr = addr;
+                  state.profile.baro_device_name = name;
+                  // persist for auto-connect at start (separate from the HR device file)
+                  try { await window.__TAURI__.core.invoke("ble_save_baro_device", { address: addr }); } catch {}
+                  try { if (window.BARO) { BARO.reset(); BARO.start(); } } catch {}
+                } else {
+                  await DB.setProfileValue("ble_device_addr", addr);
+                  await DB.setProfileValue("ble_device_type", type);
+                  await DB.setProfileValue("ble_device_name", name);
+                  // Write file for Kotlin to read at GPS start (HR auto-connect)
+                  try { await window.__TAURI__.core.invoke("ble_save_device", { address: addr, deviceType: type }); } catch {}
+                  state.profile.ble_device_addr = addr;
+                  state.profile.ble_device_type = type;
+                  state.profile.ble_device_name = name;
+                }
+                // re-render settings so the Connect/Unbind buttons appear and the baro readout resumes
+                await renderSettings(container);
              } catch (e) {
                item.querySelector(".settings-item-desc").textContent = "Ошибка: " + e;
              }
--- a/src-tauri/gen/android/app/src/main/AndroidManifest.xml
+++ b/src-tauri/gen/android/app/src/main/AndroidManifest.xml
@ -48,6 +48,11 @@
            android:foregroundServiceType="connectedDevice"
            android:exported="false" />

+        <service
+            android:name=".BleBaroService"
+            android:foregroundServiceType="connectedDevice"
+            android:exported="false" />
+
        <provider
          android:name="androidx.core.content.FileProvider"
          android:authorities="${applicationId}.fileprovider"
--- a/src-tauri/gen/android/app/src/main/java/dev/baldav/app/BleBaroService.kt
+++ b/src-tauri/gen/android/app/src/main/java/dev/baldav/app/BleBaroService.kt
@ -0,0 +1,257 @@
+package dev.baldav.app
+
+import android.app.Notification
+import android.app.NotificationChannel
+import android.app.NotificationManager
+import android.app.PendingIntent
+import android.app.Service
+import android.bluetooth.*
+import android.content.BroadcastReceiver
+import android.content.Context
+import android.content.Intent
+import android.content.IntentFilter
+import android.os.Build
+import android.os.Handler
+import android.os.IBinder
+import android.os.Looper
+import android.util.Log
+import java.io.File
+import java.util.Locale
+import java.util.UUID
+
+// Dedicated BLE connection for the DIY barometer "BaroBalDav" (ESP32-C3 + BMP280). Kept separate
+// from BleHrService so the heart-rate strap and the barometer each hold their OWN GATT link and work
+// at the same time (one adapter handles several LE connections). Reads the standard Environmental
+// Sensing service and writes the latest {pressure_pa, temp_c, ts} to ble_baro_data.json for Rust/JS.
+class BleBaroService : Service() {
+
+    companion object {
+        const val TAG = "BleBaro"
+        const val CHANNEL_ID = "baldav_ble_baro"
+        const val NOTIFICATION_ID = 3
+        const val ACTION_STOP = "dev.baldav.app.STOP_BARO"
+        const val EXTRA_ADDRESS = "address"
+
+        val ESS_SERVICE: UUID = UUID.fromString("0000181a-0000-1000-8000-00805f9b34fb")
+        val PRESSURE_CHAR: UUID = UUID.fromString("00002a6d-0000-1000-8000-00805f9b34fb") // uint32, 0.1 Pa
+        val TEMP_CHAR: UUID = UUID.fromString("00002a6e-0000-1000-8000-00805f9b34fb")     // int16,  0.01 C
+        val CCCD_UUID: UUID = UUID.fromString("00002902-0000-1000-8000-00805f9b34fb")
+
+        var isRunning = false
+            private set
+    }
+
+    private var gatt: BluetoothGatt? = null
+    private var dataFile: File? = null
+    private var logFile: File? = null
+    private var lastAddress: String? = null
+    private var connectedOnce = false
+    private var stopping = false
+    private var reconnectTries = 0
+    private val maxReconnect = 3
+    private var lastTempC: Double = Double.NaN
+    private val handler = Handler(Looper.getMainLooper())
+
+    private val btStateReceiver = object : BroadcastReceiver() {
+        override fun onReceive(ctx: Context?, intent: Intent?) {
+            if (intent?.action != BluetoothAdapter.ACTION_STATE_CHANGED) return
+            val state = intent.getIntExtra(BluetoothAdapter.EXTRA_STATE, BluetoothAdapter.ERROR)
+            if (state == BluetoothAdapter.STATE_TURNING_OFF || state == BluetoothAdapter.STATE_OFF) {
+                stopping = true
+                handler.removeCallbacksAndMessages(null)
+                disconnect()
+                stopSelf()
+            }
+        }
+    }
+
+    private fun adapter(): BluetoothAdapter? =
+        (getSystemService(BLUETOOTH_SERVICE) as? android.bluetooth.BluetoothManager)?.adapter
+
+    override fun onBind(intent: Intent?): IBinder? = null
+
+    override fun onCreate() {
+        super.onCreate()
+        createNotificationChannel()
+        try { registerReceiver(btStateReceiver, IntentFilter(BluetoothAdapter.ACTION_STATE_CHANGED)) }
+        catch (e: Exception) { Log.e(TAG, "register BT receiver: ${e.message}") }
+    }
+
+    override fun onStartCommand(intent: Intent?, flags: Int, startId: Int): Int {
+        if (intent?.action == ACTION_STOP) {
+            stopping = true
+            disconnect()
+            stopSelf()
+            return START_NOT_STICKY
+        }
+        val address = intent?.getStringExtra(EXTRA_ADDRESS)
+        if (address != null) {
+            startForeground(NOTIFICATION_ID, buildNotification("Барометр: подключение..."))
+            isRunning = true
+            val appDataDir = filesDir.parentFile ?: filesDir
+            dataFile = File(appDataDir, "ble_baro_data.json")
+            logFile = File(appDataDir, "ble_baro_log.jsonl")
+            lastAddress = address; stopping = false; connectedOnce = false; reconnectTries = 0
+            connectDevice(address)
+        }
+        return START_NOT_STICKY
+    }
+
+    // Quick scan to warm the BLE cache (avoids status=133), then connect. On scan timeout fall back
+    // to a direct connect by address - a stationary sensor is reachable even if a 5 s scan misses it.
+    private fun connectDevice(address: String) {
+        val adapter = adapter()
+        if (adapter == null || !adapter.isEnabled) { Log.e(TAG, "Bluetooth not available"); stopSelf(); return }
+        val scanner = adapter.bluetoothLeScanner
+        if (scanner == null) { directConnect(adapter, address); return }
+        val scanCallback = object : android.bluetooth.le.ScanCallback() {
+            override fun onScanResult(callbackType: Int, result: android.bluetooth.le.ScanResult) {
+                if (result.device.address == address) {
+                    try { scanner.stopScan(this) } catch (e: Exception) {}
+                    try { gatt = result.device.connectGatt(this@BleBaroService, false, gattCallback, BluetoothDevice.TRANSPORT_LE) }
+                    catch (e: Exception) { Log.e(TAG, "connectGatt: ${e.message}") }
+                }
+            }
+            override fun onScanFailed(errorCode: Int) { directConnect(adapter, address) }
+        }
+        try { scanner.startScan(scanCallback) } catch (e: Exception) { directConnect(adapter, address); return }
+        handler.postDelayed({
+            try { scanner.stopScan(scanCallback) } catch (e: Exception) {}
+            if (gatt == null) { Log.d(TAG, "scan timeout - direct connect"); directConnect(adapter, address) }
+        }, 5000)
+    }
+
+    private fun directConnect(adapter: BluetoothAdapter, address: String) {
+        if (!adapter.isEnabled) { stopSelf(); return }
+        try {
+            gatt = adapter.getRemoteDevice(address).connectGatt(this, false, gattCallback, BluetoothDevice.TRANSPORT_LE)
+        } catch (e: Exception) { Log.e(TAG, "directConnect: ${e.message}"); stopSelf() }
+    }
+
+    private val gattCallback = object : BluetoothGattCallback() {
+        override fun onConnectionStateChange(g: BluetoothGatt, status: Int, newState: Int) {
+            if (newState == BluetoothProfile.STATE_CONNECTED) {
+                updateNotification("Барометр: поиск сервисов...")
+                try { g.discoverServices() } catch (e: Exception) { Log.e(TAG, "discoverServices: ${e.message}") }
+            } else if (newState == BluetoothProfile.STATE_DISCONNECTED) {
+                isRunning = false
+                try { g.close() } catch (e: Exception) {}
+                gatt = null
+                if (!stopping && connectedOnce && reconnectTries < maxReconnect && adapter()?.isEnabled == true && lastAddress != null) {
+                    reconnectTries++
+                    updateNotification("Барометр: переподключение...")
+                    handler.postDelayed({ if (!stopping) connectDevice(lastAddress!!) }, 8000)
+                } else stopSelf()
+            }
+        }
+
+        override fun onServicesDiscovered(g: BluetoothGatt, status: Int) {
+            if (status != BluetoothGatt.GATT_SUCCESS) { Log.e(TAG, "service discovery failed: $status"); return }
+            connectedOnce = true; reconnectTries = 0; isRunning = true
+            setupBaro(g)
+            updateNotification("Барометр подключён")
+        }
+
+        override fun onCharacteristicChanged(g: BluetoothGatt, char: BluetoothGattCharacteristic, value: ByteArray) {
+            parseBaro(char, value)
+        }
+        @Deprecated("Deprecated in API 33")
+        override fun onCharacteristicChanged(g: BluetoothGatt, char: BluetoothGattCharacteristic) {
+            parseBaro(char, char.value ?: return)
+        }
+        override fun onDescriptorWrite(g: BluetoothGatt, descriptor: BluetoothGattDescriptor, status: Int) {
+            onGattOperationComplete()
+        }
+    }
+
+    private val gattQueue = mutableListOf<() -> Unit>()
+    private var gattBusy = false
+    private fun enqueueGatt(op: () -> Unit) { gattQueue.add(op); processGattQueue() }
+    private fun processGattQueue() {
+        if (gattBusy || gattQueue.isEmpty()) return
+        gattBusy = true
+        gattQueue.removeAt(0).invoke()
+    }
+    private fun onGattOperationComplete() {
+        gattBusy = false
+        handler.postDelayed({ processGattQueue() }, 100)
+    }
+
+    private fun setupBaro(g: BluetoothGatt) {
+        val svc = g.getService(ESS_SERVICE)
+        if (svc == null) { Log.e(TAG, "ESS service not found"); return }
+        val pc = svc.getCharacteristic(PRESSURE_CHAR)
+        if (pc == null) { Log.e(TAG, "pressure characteristic not found"); return }
+        val tc = svc.getCharacteristic(TEMP_CHAR)
+        enqueueGatt { subscribeNotify(g, pc) }
+        if (tc != null) enqueueGatt { subscribeNotify(g, tc) }
+        Log.d(TAG, "subscribed pressure${if (tc != null) " + temp" else ""}")
+    }
+
+    private fun subscribeNotify(g: BluetoothGatt, char: BluetoothGattCharacteristic) {
+        try {
+            g.setCharacteristicNotification(char, true)
+            val desc = char.getDescriptor(CCCD_UUID)
+            if (desc != null) {
+                desc.value = BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE
+                g.writeDescriptor(desc)
+            } else onGattOperationComplete()
+        } catch (e: Exception) { Log.e(TAG, "subscribeNotify: ${e.message}"); onGattOperationComplete() }
+    }
+
+    private fun parseBaro(char: BluetoothGattCharacteristic, value: ByteArray) {
+        when (char.uuid) {
+            TEMP_CHAR -> if (value.size >= 2) {
+                val u = ((value[1].toInt() and 0xFF) shl 8) or (value[0].toInt() and 0xFF)
+                lastTempC = u.toShort().toInt() / 100.0
+            }
+            PRESSURE_CHAR -> if (value.size >= 4) {
+                val raw = (value[0].toLong() and 0xFF) or ((value[1].toLong() and 0xFF) shl 8) or
+                          ((value[2].toLong() and 0xFF) shl 16) or ((value[3].toLong() and 0xFF) shl 24)
+                val pa = raw / 10.0
+                val ts = System.currentTimeMillis() / 1000
+                val tj = if (!lastTempC.isNaN()) ",\"temp_c\":${String.format(Locale.US, "%.2f", lastTempC)}" else ""
+                val json = "{\"pressure_pa\":${String.format(Locale.US, "%.1f", pa)}$tj,\"ts\":$ts}"
+                try { dataFile?.writeText(json) } catch (e: Exception) { Log.e(TAG, "write: ${e.message}") }
+                try { logFile?.appendText(json + "\n") } catch (e: Exception) {}
+                Log.d(TAG, "Baro: $pa Pa  T=$lastTempC")
+            }
+        }
+    }
+
+    private fun disconnect() {
+        isRunning = false
+        handler.removeCallbacksAndMessages(null)
+        try { gatt?.disconnect() } catch (e: Exception) {}
+        try { gatt?.close() } catch (e: Exception) {}
+        gatt = null
+    }
+
+    private fun createNotificationChannel() {
+        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
+            val channel = NotificationChannel(CHANNEL_ID, "BLE барометр", NotificationManager.IMPORTANCE_LOW)
+            getSystemService(NotificationManager::class.java).createNotificationChannel(channel)
+        }
+    }
+    private fun buildNotification(text: String): Notification {
+        val intent = packageManager.getLaunchIntentForPackage(packageName)
+        val pi = PendingIntent.getActivity(this, 0, intent, PendingIntent.FLAG_IMMUTABLE)
+        return Notification.Builder(this, CHANNEL_ID)
+            .setContentTitle("BalDav барометр")
+            .setContentText(text)
+            .setSmallIcon(android.R.drawable.ic_menu_compass)
+            .setContentIntent(pi)
+            .setOngoing(true)
+            .build()
+    }
+    private fun updateNotification(text: String) {
+        getSystemService(NotificationManager::class.java).notify(NOTIFICATION_ID, buildNotification(text))
+    }
+
+    override fun onDestroy() {
+        stopping = true
+        try { unregisterReceiver(btStateReceiver) } catch (e: Exception) {}
+        disconnect()
+        super.onDestroy()
+    }
+}
--- a/src-tauri/gen/android/app/src/main/java/dev/baldav/app/BleHrService.kt
+++ b/src-tauri/gen/android/app/src/main/java/dev/baldav/app/BleHrService.kt
@ -19,6 +19,7 @@ import android.os.Looper
 import android.os.ParcelUuid
 import android.util.Log
 import java.io.File
+import java.util.Locale
 import java.util.UUID
 import org.json.JSONArray
 import org.json.JSONObject
@ -42,6 +43,11 @@ class BleHrService : Service() {
        val BATTERY_SERVICE: UUID = UUID.fromString("0000180f-0000-1000-8000-00805f9b34fb")
        val BATTERY_LEVEL: UUID = UUID.fromString("00002a19-0000-1000-8000-00805f9b34fb")

+        // Standard Environmental Sensing — our DIY barometer "BaroBalDav" (ESP32-C3 + BMP280)
+        val ESS_SERVICE: UUID = UUID.fromString("0000181a-0000-1000-8000-00805f9b34fb")
+        val PRESSURE_CHAR: UUID = UUID.fromString("00002a6d-0000-1000-8000-00805f9b34fb") // uint32, 0.1 Pa
+        val TEMP_CHAR: UUID = UUID.fromString("00002a6e-0000-1000-8000-00805f9b34fb")     // int16,  0.01 C
+
        // FitPro Nordic UART
        val FITPRO_SERVICE: UUID = UUID.fromString("6e400001-b5a3-f393-e0a9-e50e24dcca9d")
        val FITPRO_WRITE: UUID = UUID.fromString("6e400002-b5a3-f393-e0a9-e50e24dcca9d")
@ -78,6 +84,11 @@ class BleHrService : Service() {
    private var scanResultsFile: File? = null
    private var fitproWriteChar: BluetoothGattCharacteristic? = null
    private var fitproGatt: BluetoothGatt? = null
+    // DIY barometer (BaroBalDav): its own data/log files, and the last temperature so each pressure
+    // reading can carry the temperature for the altitude calc on the JS side.
+    private var baroDataFile: File? = null
+    private var baroLogFile: File? = null
+    private var lastTempC: Double = Double.NaN

    // One handler for all postDelayed work, so teardown can cancel every pending callback at once
    // (a stray callback touching a GATT/scanner after the adapter is off crashes the native BT stack).
@ -135,9 +146,14 @@ class BleHrService : Service() {
                    startForeground(NOTIFICATION_ID, buildNotification("Подключение..."))
                    isRunning = true
                    val appDataDir = filesDir.parentFile ?: filesDir
-                    dataFile = File(appDataDir, "ble_hr_data.json")
-                    logFile = File(appDataDir, "ble_hr_log.jsonl")
-                    uptimeFile = File(appDataDir, "strap_uptime.json")
+                    if (deviceType == "baro") {
+                        baroDataFile = File(appDataDir, "ble_baro_data.json")
+                        baroLogFile = File(appDataDir, "ble_baro_log.jsonl")
+                    } else {
+                        dataFile = File(appDataDir, "ble_hr_data.json")
+                        logFile = File(appDataDir, "ble_hr_log.jsonl")
+                        uptimeFile = File(appDataDir, "strap_uptime.json")
+                    }
                    // fresh user-initiated connect: arm reconnect only after it actually connects
                    lastAddress = address; stopping = false; connectedOnce = false; reconnectTries = 0
                    connectDevice(address)
@ -176,8 +192,10 @@ class BleHrService : Service() {

                val services = result.scanRecord?.serviceUuids?.map { it.uuid } ?: emptyList()
                val type = when {
+                    services.contains(ESS_SERVICE) -> "baro"
                    services.contains(HR_SERVICE_UUID) -> "hr_standard"
                    services.contains(FITPRO_SERVICE) -> "fitpro"
+                    name.lowercase().contains("baro") -> "baro"
                    name.lowercase().let { it.contains("fitpro") || it.contains("band") || it.contains("m7") || it.contains("m8") } -> "fitpro"
                    name.lowercase().let { it.contains("coospo") || it.contains("polar") || it.contains("garmin") || it.contains("hr") } -> "hr_standard"
                    else -> "unknown"
@ -243,12 +261,14 @@ class BleHrService : Service() {
        handler.postDelayed({
            try { scanner.stopScan(scanCallback) } catch (e: Exception) { Log.e(TAG, "stopScan: ${e.message}") }
            if (gatt == null) {
-                // Not seen in the scan → the band isn't nearby/on. Do NOT hold a GATT connect to
-                // an absent device (that keeps the radio busy and drains the battery). Give up;
-                // the user re-taps "Подключить" once the band is on.
-                Log.d(TAG, "Scan timeout, device $address not found - stopping")
-                writeData("""{"status":"not_found","ts":${System.currentTimeMillis()/1000}}""")
-                stopSelf()
+                // Not re-found in the pre-connect scan within 5 s. A present-but-not-rescanned device
+                // (a stationary sensor, or a BlueZ peripheral that the scanner just missed) still
+                // connects by address, so fall back to a direct connect instead of giving up. The
+                // address type is already cached from the earlier scan, so connectGatt uses it.
+                Log.d(TAG, "Scan timeout, device $address not re-found - direct connect fallback")
+                val a = adapter()
+                if (a != null && a.isEnabled) directConnect(a, address)
+                else { writeData("""{"status":"not_found","ts":${System.currentTimeMillis()/1000}}"""); stopSelf() }
            }
        }, 5000)
    }
@ -297,6 +317,7 @@ class BleHrService : Service() {
            if (deviceType == "unknown") {
                deviceType = when {
                    g.getService(HR_SERVICE_UUID) != null -> "hr_standard"
+                    g.getService(ESS_SERVICE) != null -> "baro"
                    g.getService(FITPRO_SERVICE) != null -> "fitpro"
                    else -> "fitpro" // fallback: try FitPro (Nordic UART is common for cheap bracelets)
                }
@ -308,15 +329,25 @@ class BleHrService : Service() {
            when (deviceType) {
                "hr_standard" -> setupStandardHr(g)
                "fitpro" -> setupFitPro(g)
+                "baro" -> setupBaro(g)
            }
-            updateNotification("Пульсометр подключён")
-            startHydrationReminder() // workout is on (strap connected) → arm the drink reminder
+            updateNotification(if (deviceType == "baro") "Барометр подключён" else "Пульсометр подключён")
+            // drink reminder is a workout/HR feature; the barometer is just a passive altitude source
+            if (deviceType != "baro") startHydrationReminder()
        }

        override fun onCharacteristicChanged(g: BluetoothGatt, char: BluetoothGattCharacteristic, value: ByteArray) {
            Log.d(TAG, "Data received (${value.size} bytes): ${value.joinToString(" ") { "%02X".format(it) }}")
+            // Route by WHAT the characteristic is, not the current deviceType: if an HR auto-connect
+            // races in and flips deviceType while the baro link is still delivering, a pressure/temp
+            // packet must NOT be parsed as HR. Standard GATT UUIDs are unambiguous.
+            when (char.uuid) {
+                PRESSURE_CHAR, TEMP_CHAR -> { parseBaro(char, value); return }
+                HR_MEASUREMENT_UUID -> { parseStandardHr(value); return }
+            }
            when (deviceType) {
                "hr_standard" -> parseStandardHr(value)
+                "baro" -> parseBaro(char, value)
                "fitpro" -> {
                    // Send ACK for data packets (0xCD) — required by FitPro protocol
                    if (value.isNotEmpty() && value[0] == 0xCD.toByte() && value.size >= 4) {
@ -391,6 +422,61 @@ class BleHrService : Service() {
        } catch (e: Exception) { Log.e(TAG, "readBattery: ${e.message}") }
    }

+    // DIY barometer (Environmental Sensing): subscribe to pressure (required) and temperature
+    // (optional) notifications. Two CCCD writes can't overlap, so queue them like the FitPro setup.
+    private fun setupBaro(g: BluetoothGatt) {
+        val svc = g.getService(ESS_SERVICE)
+        if (svc == null) { Log.e(TAG, "ESS service not found"); return }
+        val pc = svc.getCharacteristic(PRESSURE_CHAR)
+        if (pc == null) { Log.e(TAG, "Pressure characteristic not found"); return }
+        val tc = svc.getCharacteristic(TEMP_CHAR)
+        enqueueGatt { subscribeNotify(g, pc) }
+        if (tc != null) enqueueGatt { subscribeNotify(g, tc) }
+        Log.d(TAG, "Baro setup: subscribed pressure${if (tc != null) " + temp" else ""}")
+    }
+
+    // Enable notifications on one characteristic and write its CCCD; onDescriptorWrite advances the
+    // GATT queue. If there's no CCCD, complete immediately so the queue doesn't stall.
+    private fun subscribeNotify(g: BluetoothGatt, char: BluetoothGattCharacteristic) {
+        try {
+            g.setCharacteristicNotification(char, true)
+            val desc = char.getDescriptor(CCCD_UUID)
+            if (desc != null) {
+                desc.value = BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE
+                g.writeDescriptor(desc)
+            } else onGattOperationComplete()
+        } catch (e: Exception) { Log.e(TAG, "subscribeNotify: ${e.message}"); onGattOperationComplete() }
+    }
+
+    // Pressure char = uint32 little-endian in 0.1 Pa; Temperature char = int16 little-endian in 0.01 C
+    // (standard BLE Environmental Sensing units). Temperature arrives on its own notification, so keep
+    // the last value and attach it to each pressure reading. JS turns pressure into altitude.
+    private fun parseBaro(char: BluetoothGattCharacteristic, value: ByteArray) {
+        when (char.uuid) {
+            TEMP_CHAR -> {
+                if (value.size >= 2) {
+                    val u = ((value[1].toInt() and 0xFF) shl 8) or (value[0].toInt() and 0xFF)
+                    lastTempC = u.toShort().toInt() / 100.0
+                }
+            }
+            PRESSURE_CHAR -> {
+                if (value.size >= 4) {
+                    val raw = (value[0].toLong() and 0xFF) or ((value[1].toLong() and 0xFF) shl 8) or
+                              ((value[2].toLong() and 0xFF) shl 16) or ((value[3].toLong() and 0xFF) shl 24)
+                    val pa = raw / 10.0 // 0.1 Pa units -> Pa
+                    val ts = System.currentTimeMillis() / 1000
+                    // format with Locale.US - the phone's RU locale writes a decimal comma, which is
+                    // invalid JSON and fails the Rust parse
+                    val tj = if (!lastTempC.isNaN()) ",\"temp_c\":${String.format(Locale.US, "%.2f", lastTempC)}" else ""
+                    val json = "{\"pressure_pa\":${String.format(Locale.US, "%.1f", pa)}$tj,\"ts\":$ts}"
+                    try { baroDataFile?.writeText(json) } catch (e: Exception) { Log.e(TAG, "baro write: ${e.message}") }
+                    try { baroLogFile?.appendText(json + "\n") } catch (e: Exception) {}
+                    Log.d(TAG, "Baro: $pa Pa  T=$lastTempC")
+                }
+            }
+        }
+    }
+
    private val gattQueue = mutableListOf<() -> Unit>()
    private var gattBusy = false

--- a/src-tauri/gen/android/app/src/main/java/dev/baldav/app/Hydration.kt
+++ b/src-tauri/gen/android/app/src/main/java/dev/baldav/app/Hydration.kt
@ -12,8 +12,10 @@ import android.os.Build
 import android.os.Handler
 import android.os.VibrationEffect
 import android.os.Vibrator
+import android.speech.tts.TextToSpeech
 import android.util.Log
 import java.io.File
+import java.util.Locale
 import org.json.JSONObject

 // Drink reminder shared by GpsRecorderService (rides) and BleHrService (VR/workout). LEVEL-based,
@ -25,18 +27,23 @@ import org.json.JSONObject
 object Hydration {
    private const val TAG = "Hydration"
    private const val CH = "baldav_hydration"
-    private var accruedMl = 0.0          // running water deficit: start-of-session shortfall + sweat
-    private var startDeficitMl = 0.0     // how far behind you were at session start (from the food log)
-    private var pendingStart = false     // apply startDeficitMl on the first tick after reset()
+    private var baseDeficit = 0.0        // sedentary shortfall at (re)seed: need-so-far minus intake
+    private var sweatMl = 0.0            // activity sweat accrued this session (grows with the session)
+    private var startDeficitMl = 0.0     // last seeded base from the food log; applied on (re)seed
+    private var seedSeq = 0L             // JS bumps it on (re)seed (e.g. after you log a drink)
+    private var lastSeedSeq = -1L        // a change re-applies startDeficitMl to baseDeficit mid-session
+    private var pendingStart = false     // apply the seed on the first tick after reset()
    private var lastTickMs = 0L
    private var lastBeepMs = 0L
    private var lastCfgMs = 0L
    private var enabled = true           // ON by default — works out of the box, no toggle to find
-    private var sweatMlPerMin = 10.0     // need rate during an active session (600 ml/h default)
+    private var sweatMlPerMin = 10.0     // need rate during an active session (set per activity by JS)
    private var alertMl = 600.0          // beep once the deficit reaches this
    private var reAlertMs = 15 * 60 * 1000L
    private var lastLogMs = 0L
    private var savedAlarmVol = -1       // alarm volume to restore after an alert
+    private var tts: TextToSpeech? = null
+    private var ttsReady = false         // the signal is a SPOKEN "hydrate now" — unmistakably BalDav

    private fun readCfg(ctx: Context) {
        try {
@ -48,6 +55,11 @@ object Hydration {
                alertMl = j.optInt("alertMl", 600).coerceIn(100, 3000).toDouble()
                reAlertMs = j.optInt("reAlertMin", 15).coerceIn(2, 120) * 60_000L
                startDeficitMl = j.optInt("startDeficitMl", 0).coerceIn(0, 5000).toDouble()
+                seedSeq = j.optLong("seedSeq", 0L)
+                // a NON-ZERO new seedSeq means JS recomputed the base (session start / after a drink)
+                // -> re-apply it to baseDeficit mid-session; sweat keeps accruing. seedSeq=0 (profile
+                // save, init) must NOT zero the deficit mid-ride, so it's ignored here.
+                if (seedSeq != 0L && seedSeq != lastSeedSeq) { baseDeficit = startDeficitMl; lastSeedSeq = seedSeq }
            } else enabled = true // no config yet -> ON by default
        } catch (e: Exception) { Log.e(TAG, "cfg: ${e.message}"); enabled = true }
    }
@ -63,14 +75,15 @@ object Hydration {
        val now = System.currentTimeMillis()
        if (now - lastCfgMs > 30_000L) { readCfg(ctx); lastCfgMs = now }
        if (!enabled) { if (now - lastLogMs > 120_000L) { logState(ctx, "disabled"); lastLogMs = now }; return }
-        if (pendingStart) { accruedMl = startDeficitMl; pendingStart = false }
-        if (lastTickMs == 0L) { lastTickMs = now; logState(ctx, "start"); lastLogMs = now; return }
+        if (pendingStart) { baseDeficit = startDeficitMl; sweatMl = 0.0; lastSeedSeq = seedSeq; pendingStart = false }
+        if (lastTickMs == 0L) { lastTickMs = now; ensureTts(ctx); logState(ctx, "start"); lastLogMs = now; return }
        val dtMin = (now - lastTickMs) / 60_000.0
        lastTickMs = now
-        accruedMl += sweatMlPerMin * dtMin
-        if (accruedMl >= alertMl && now - lastBeepMs >= reAlertMs) {
+        sweatMl += sweatMlPerMin * dtMin
+        val deficit = baseDeficit + sweatMl
+        if (deficit >= alertMl && now - lastBeepMs >= reAlertMs) {
            lastBeepMs = now
-            val ok = beep(ctx, handler); vibrate(ctx); notify(ctx, accruedMl.toInt())
+            val ok = beep(ctx, handler); vibrate(ctx); notify(ctx, deficit.toInt())
            logState(ctx, if (ok) "beepOk" else "beepError"); lastLogMs = now
        } else if (now - lastLogMs > 120_000L) { logState(ctx, "tick"); lastLogMs = now }
    }
@ -80,8 +93,8 @@ object Hydration {
        try {
            val f = File(ctx.filesDir.parentFile ?: ctx.filesDir, "hydration_log.jsonl")
            f.appendText("{\"ts\":${System.currentTimeMillis() / 1000},\"ev\":\"$event\"," +
-                "\"enabled\":$enabled,\"accruedMl\":${accruedMl.toInt()},\"alertMl\":${alertMl.toInt()}," +
-                "\"startMl\":${startDeficitMl.toInt()}}\n")
+                "\"enabled\":$enabled,\"accruedMl\":${(baseDeficit + sweatMl).toInt()},\"sweatMl\":${sweatMl.toInt()}," +
+                "\"baseMl\":${baseDeficit.toInt()},\"alertMl\":${alertMl.toInt()},\"startMl\":${startDeficitMl.toInt()}}\n")
        } catch (e: Exception) {}
    }

@ -93,24 +106,43 @@ object Hydration {
            val am = ctx.getSystemService(Context.AUDIO_SERVICE) as AudioManager
            if (savedAlarmVol < 0) savedAlarmVol = am.getStreamVolume(AudioManager.STREAM_ALARM)
            am.setStreamVolume(AudioManager.STREAM_ALARM, am.getStreamMaxVolume(AudioManager.STREAM_ALARM), 0)
-            val uri = RingtoneManager.getActualDefaultRingtoneUri(ctx, RingtoneManager.TYPE_ALARM)
-                ?: RingtoneManager.getDefaultUri(RingtoneManager.TYPE_ALARM)
-            val mp = MediaPlayer()
-            mp.setAudioAttributes(AudioAttributes.Builder()
-                .setUsage(AudioAttributes.USAGE_ALARM)
-                .setContentType(AudioAttributes.CONTENT_TYPE_SONIFICATION).build())
-            mp.setDataSource(ctx, uri)
-            mp.isLooping = true
-            mp.prepare()
-            mp.start()
+            if (tts == null) {
+                tts = TextToSpeech(ctx.applicationContext) { status ->
+                    ttsReady = status == TextToSpeech.SUCCESS
+                    if (ttsReady) { try { tts?.language = Locale.US } catch (e: Exception) {}; speakNow() }
+                }
+            } else if (ttsReady) speakNow()
+            // restore the alarm volume a few seconds after the phrase
            handler.postDelayed({
-                try { mp.stop(); mp.release() } catch (e: Exception) {}
                try { if (savedAlarmVol >= 0) { am.setStreamVolume(AudioManager.STREAM_ALARM, savedAlarmVol, 0); savedAlarmVol = -1 } } catch (e: Exception) {}
-            }, 4000)
+            }, 5000)
            true
        } catch (e: Exception) { Log.e(TAG, "beep: ${e.message}"); false }
    }

+    // Warm the TTS engine up at session start so the first alert isn't silent (init is async).
+    private fun ensureTts(ctx: Context) {
+        if (tts != null) return
+        try {
+            tts = TextToSpeech(ctx.applicationContext) { status ->
+                ttsReady = status == TextToSpeech.SUCCESS
+                if (ttsReady) { try { tts?.language = Locale.US } catch (e: Exception) {} }
+            }
+        } catch (e: Exception) { Log.e(TAG, "tts init: ${e.message}") }
+    }
+
+    // Speak the phrase over the ALARM stream so it's loud even with media muted.
+    private fun speakNow() {
+        try {
+            val t = tts ?: return
+            t.setAudioAttributes(AudioAttributes.Builder()
+                .setUsage(AudioAttributes.USAGE_ALARM)
+                .setContentType(AudioAttributes.CONTENT_TYPE_SPEECH).build())
+            t.speak("hydrate now", TextToSpeech.QUEUE_FLUSH, null, "hyd1")
+            t.speak("hydrate now", TextToSpeech.QUEUE_ADD, null, "hyd2")
+        } catch (e: Exception) { Log.e(TAG, "speak: ${e.message}") }
+    }
+
    private fun vibrate(ctx: Context) {
        try {
            val v = ctx.getSystemService(Context.VIBRATOR_SERVICE) as? Vibrator ?: return
@ -127,11 +159,12 @@ object Hydration {
            if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O && nm.getNotificationChannel(CH) == null) {
                nm.createNotificationChannel(NotificationChannel(CH, "Напоминание пить", NotificationManager.IMPORTANCE_HIGH))
            }
+            val time = java.text.SimpleDateFormat("HH:mm", Locale.getDefault()).format(java.util.Date())
            val n = Notification.Builder(ctx, CH)
-                .setContentTitle("Попей воды!")
-                .setContentText("Отстаёшь примерно на $deficitMl мл — попей")
+                .setContentTitle("БалДав: попей воды")
+                .setContentText("$time — отстаёшь примерно на $deficitMl мл")
                .setSmallIcon(android.R.drawable.ic_menu_compass)
-                .setAutoCancel(true)
+                .setAutoCancel(true) // stays in the shade as a record until you tap it
                .build()
            nm.notify(776601, n)
        } catch (e: Exception) { Log.e(TAG, "notify: ${e.message}") }
--- a/src-tauri/gen/android/app/src/main/java/dev/baldav/app/MainActivity.kt
+++ b/src-tauri/gen/android/app/src/main/java/dev/baldav/app/MainActivity.kt
@ -565,9 +565,14 @@ class MainActivity : TauriActivity() {
        val type = if (lastColon > 0) payload.substring(lastColon + 1) else "hr_standard"
        Log.d("BalDav", "BLE connect: $address ($type)")
        if (ensureBlePermissions()) {
-          val intent = Intent(this, BleHrService::class.java).apply {
-            putExtra(BleHrService.EXTRA_ADDRESS, address)
-            putExtra(BleHrService.EXTRA_DEVICE_TYPE, type)
+          // barometer has its own service so it and the HR strap connect at the same time
+          val intent = if (type == "baro") {
+            Intent(this, BleBaroService::class.java).apply { putExtra(BleBaroService.EXTRA_ADDRESS, address) }
+          } else {
+            Intent(this, BleHrService::class.java).apply {
+              putExtra(BleHrService.EXTRA_ADDRESS, address)
+              putExtra(BleHrService.EXTRA_DEVICE_TYPE, type)
+            }
          }
          if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) startForegroundService(intent) else startService(intent)
        }
@ -578,6 +583,12 @@ class MainActivity : TauriActivity() {
        intent.action = BleHrService.ACTION_STOP
        startService(intent)
      }
+      cmd == "baro_disconnect" -> {
+        Log.d("BalDav", "Baro disconnect")
+        val intent = Intent(this, BleBaroService::class.java)
+        intent.action = BleBaroService.ACTION_STOP
+        startService(intent)
+      }
      cmd == "ble_request_enable" -> {
        Log.d("BalDav", "Requesting Bluetooth enable")
        if (ensureBlePermissions()) {
@ -711,6 +722,18 @@ class MainActivity : TauriActivity() {

  private fun autoStartBle(appDataDir: File) {
    try {
+      // Barometer: auto-connect its own device via its own service, so it runs alongside the HR strap
+      val baroFile = File(appDataDir, "baro_device.json")
+      if (baroFile.exists()) {
+        val bjson = baroFile.readText().trim()
+        val baddr = Regex(""""addr"\s*:\s*"([^"]+)"""").find(bjson)?.groupValues?.get(1)
+        if (!baddr.isNullOrEmpty() && ensureBlePermissions()) {
+          Log.d("BalDav", "Auto-starting baro: $baddr")
+          val bi = Intent(this, BleBaroService::class.java).apply { putExtra(BleBaroService.EXTRA_ADDRESS, baddr) }
+          if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) startForegroundService(bi) else startService(bi)
+        }
+      }
+
      // Read paired BLE device from profile in DB
      val bleAddr = File(appDataDir, "ble_device.txt")
      // JS saves ble_device_addr in profile (SQLite), but we can't read SQLite here easily.
--- a/src-tauri/src/ble.rs
+++ b/src-tauri/src/ble.rs
@ -29,6 +29,17 @@ pub struct HrReading {
    pub battery: Option<u8>,
 }

+// DIY barometer reading (BaroBalDav): atmospheric pressure in Pa and optional chip temperature.
+// JS turns pressure into altitude (hypsometric formula, using temp), anchored to GPS at ride start.
+#[derive(Serialize, Deserialize, Clone, Debug, Default)]
+pub struct BaroReading {
+    pub pressure_pa: f64,
+    #[serde(default)]
+    pub temp_c: Option<f64>,
+    #[serde(alias = "ts", default)]
+    pub timestamp: u64,
+}
+
 // Shared state for BLE operations
 #[cfg(not(target_os = "android"))]
 lazy_static::lazy_static! {
@ -49,6 +60,9 @@ struct BleState {
 const HR_SERVICE_UUID: &str = "0000180d-0000-1000-8000-00805f9b34fb";
 const HR_MEASUREMENT_UUID: &str = "00002a37-0000-1000-8000-00805f9b34fb";

+// Standard Environmental Sensing — our DIY barometer "BaroBalDav"
+const ESS_SERVICE: &str = "0000181a-0000-1000-8000-00805f9b34fb";
+
 // FitPro Nordic UART UUIDs
 const FITPRO_SERVICE: &str = "6e400001-b5a3-f393-e0a9-e50e24dcca9d";
 const FITPRO_WRITE: &str = "6e400002-b5a3-f393-e0a9-e50e24dcca9d";
@ -81,6 +95,10 @@ mod desktop {
    }

    fn detect_device_type(name: &str, services: &[Uuid]) -> String {
+        // Our DIY barometer advertises standard Environmental Sensing
+        if services.contains(&uuid(ESS_SERVICE)) {
+            return "baro".to_string();
+        }
        // Check for standard HR service
        if services.contains(&uuid(HR_SERVICE_UUID)) {
            return "hr_standard".to_string();
@ -384,6 +402,15 @@ mod android {
        }
        Ok(None)
    }
+
+    pub fn read_baro_data(app: &tauri::AppHandle) -> Result<Option<BaroReading>, String> {
+        if let Some(s) = read_file(app, "ble_baro_data.json") {
+            if let Ok(r) = serde_json::from_str::<BaroReading>(&s) {
+                if r.pressure_pa > 0.0 { return Ok(Some(r)); }
+            }
+        }
+        Ok(None)
+    }
 }

 // --- Tauri commands ---
@ -465,6 +492,18 @@ pub fn ble_get_hr(
    { android::read_hr_data(&app) }
 }

+// Latest barometer reading (BaroBalDav). Android: read from the file the Kotlin BLE service writes.
+// Desktop: not wired (btleplug baro path not implemented) — returns None.
+#[tauri::command]
+pub fn ble_get_baro(
+    app: tauri::AppHandle,
+) -> Result<Option<BaroReading>, String> {
+    #[cfg(not(target_os = "android"))]
+    { let _ = &app; Ok(None) }
+    #[cfg(target_os = "android")]
+    { android::read_baro_data(&app) }
+}
+
 // Full HR history for the current workout. The Kotlin foreground service appends every
 // reading to ble_hr_log.jsonl (one {"hr","ts"[,"bat"]} per line) — that keeps logging with
 // the screen off, unlike the JS poll which Android freezes in the background. The workout
@ -557,6 +596,29 @@ pub fn ble_save_device(app: tauri::AppHandle, address: String, device_type: Stri
    Ok(())
 }

+// Disconnect ONLY the barometer (its own service), leaving the HR strap connected.
+#[tauri::command]
+pub async fn ble_baro_disconnect(app: tauri::AppHandle) -> Result<String, String> {
+    #[cfg(not(target_os = "android"))]
+    { let _ = &app; Ok("desktop: no-op".to_string()) }
+    #[cfg(target_os = "android")]
+    { android::send_command(&app, "baro_disconnect")?; Ok("Disconnecting baro".to_string()) }
+}
+
+// Persist the paired barometer so the Kotlin side auto-connects it at start (separate from the HR
+// device file). Empty address clears it.
+#[tauri::command]
+pub fn ble_save_baro_device(app: tauri::AppHandle, address: String) -> Result<(), String> {
+    use tauri::Manager;
+    let data_dir = app.path().app_data_dir().map_err(|e: tauri::Error| e.to_string())?;
+    let json = format!(r#"{{"addr":"{}","type":"baro"}}"#, address);
+    std::fs::write(data_dir.join("baro_device.json"), &json).ok();
+    if let Some(root) = data_dir.parent().and_then(|p| p.parent()) {
+        std::fs::write(root.join("baro_device.json"), &json).ok();
+    }
+    Ok(())
+}
+
 #[tauri::command]
 pub fn ble_check_bluetooth(
    app: tauri::AppHandle,
--- a/src-tauri/src/lib.rs
+++ b/src-tauri/src/lib.rs
@ -550,10 +550,12 @@ fn gps_service_command(app: tauri::AppHandle, cmd: String) -> Result<String, Str
 // start_deficit_ml: how far behind on water you were at session start (from logged intake vs
 // need-so-far), computed in JS and seeded into the native deficit. From the settings screen it is 0.
 #[tauri::command]
-fn set_hydration_config(app: tauri::AppHandle, enabled: bool, alert_ml: u32, sweat_ml_per_hour: u32, re_alert_min: u32, start_deficit_ml: u32) -> Result<String, String> {
+fn set_hydration_config(app: tauri::AppHandle, enabled: bool, alert_ml: u32, sweat_ml_per_hour: u32, re_alert_min: u32, start_deficit_ml: u32, seed_seq: Option<u64>) -> Result<String, String> {
+    // seed_seq: bump it (e.g. a timestamp) whenever the base deficit is recomputed mid-session
+    // (after logging a drink) so the native side re-applies start_deficit_ml to its baseDeficit.
    let json = format!(
-        "{{\"enabled\":{},\"alertMl\":{},\"sweatMlPerHour\":{},\"reAlertMin\":{},\"startDeficitMl\":{}}}",
-        enabled, alert_ml.clamp(100, 3000), sweat_ml_per_hour.clamp(60, 2000), re_alert_min.clamp(2, 120), start_deficit_ml.clamp(0, 5000)
+        "{{\"enabled\":{},\"alertMl\":{},\"sweatMlPerHour\":{},\"reAlertMin\":{},\"startDeficitMl\":{},\"seedSeq\":{}}}",
+        enabled, alert_ml.clamp(100, 3000), sweat_ml_per_hour.clamp(60, 2000), re_alert_min.clamp(2, 120), start_deficit_ml.clamp(0, 5000), seed_seq.unwrap_or(0)
    );
    write_app_root_file(&app, "hydration.json", &json);
    Ok(json)
@ -1313,7 +1315,7 @@ pub fn run() {
                .add_migrations("sqlite:baldav.db", migrations)
                .build(),
        )
-        .invoke_handler(tauri::generate_handler![get_safe_insets, import_seed_products, import_tiles, download_file, get_points_filename, delete_points_file, gps_set_session_id, list_points_files, read_points_file, pick_file_open, get_picked_file, debug_native_paths, rebuild_roads, get_road_points, get_ride_graph, get_elev_correction, get_app_info, gps_service_command, set_hydration_config, set_live_config, send_sms, pick_contact, get_contact_result, gps_service_read_points, brouter_route, brouter_download_tile, brouter_download_status, brouter_list_tiles, save_file, export_image, read_file_base64, export_db, import_db, restart_app, get_update_info, http_request, chzn_http, ble::ble_scan, ble::ble_scan_results, ble::ble_connect, ble::ble_disconnect, ble::ble_get_hr, ble::ble_is_connected, ble::ble_check_bluetooth, ble::ble_save_device, ble::ble_clear_hr, ble::ble_read_hr_log, ble::ble_read_strap_uptime, ble::ble_reset_strap_uptime, ble::ble_request_enable, read_state_file])
+        .invoke_handler(tauri::generate_handler![get_safe_insets, import_seed_products, import_tiles, download_file, get_points_filename, delete_points_file, gps_set_session_id, list_points_files, read_points_file, pick_file_open, get_picked_file, debug_native_paths, rebuild_roads, get_road_points, get_ride_graph, get_elev_correction, get_app_info, gps_service_command, set_hydration_config, set_live_config, send_sms, pick_contact, get_contact_result, gps_service_read_points, brouter_route, brouter_download_tile, brouter_download_status, brouter_list_tiles, save_file, export_image, read_file_base64, export_db, import_db, restart_app, get_update_info, http_request, chzn_http, ble::ble_scan, ble::ble_scan_results, ble::ble_connect, ble::ble_disconnect, ble::ble_get_hr, ble::ble_get_baro, ble::ble_baro_disconnect, ble::ble_save_baro_device, ble::ble_is_connected, ble::ble_check_bluetooth, ble::ble_save_device, ble::ble_clear_hr, ble::ble_read_hr_log, ble::ble_read_strap_uptime, ble::ble_reset_strap_uptime, ble::ble_request_enable, read_state_file])
        .run(tauri::generate_context!())
        .expect("error while running tauri application");
 }
--- a/tools/baro-sensor/arduino/baro_sensor/baro_sensor.ino
+++ b/tools/baro-sensor/arduino/baro_sensor/baro_sensor.ino
@ -0,0 +1,70 @@
+// BalDav BLE barometer - Arduino IDE version (ESP32-C3 SuperMini + BMP280).
+// Reads BMP280 over I2C at max oversampling (+IIR) and broadcasts pressure and temperature over
+// BLE as the standard Environmental Sensing service, ~1 Hz. baldav reads it via noble and turns
+// pressure into altitude (using the temperature for the hypsometric correction). It advertises
+// continuously so a USB power bank does not cut off on an idle load.
+//
+// One-time setup in Arduino IDE:
+//   1. File > Preferences > Additional Boards Manager URLs:
+//        https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
+//   2. Boards Manager: install "esp32 by Espressif Systems".
+//   3. Tools > Board > ESP32 Arduino > "ESP32C3 Dev Module".
+//      Tools > USB CDC On Boot > Enabled   (so the native USB serial works).
+//   4. Library Manager: install "Adafruit BMP280 Library" (pulls Adafruit Unified Sensor +
+//      Adafruit BusIO) and "NimBLE-Arduino".
+//   5. Plug the board (USB-C), pick the port, press Upload.
+//      If upload can't connect: hold BOOT (GPIO9), tap RESET, release BOOT, upload again.
+
+#include <Wire.h>
+#include <Adafruit_BMP280.h>
+#include <NimBLEDevice.h>
+
+static const int     SDA_PIN   = 3;     // BMP280 SDA -> GPIO3
+static const int     SCL_PIN   = 4;     // BMP280 SCL -> GPIO4
+static const uint8_t BMP_ADDR_A = 0x76; // SDO -> GND
+static const uint8_t BMP_ADDR_B = 0x77; // SDO -> 3V3 (fallback)
+
+Adafruit_BMP280 bmp;
+NimBLECharacteristic* chPress;   // 0x2A6D Pressure,    uint32, units 0.1 Pa
+NimBLECharacteristic* chTemp;    // 0x2A6E Temperature, int16,  units 0.01 C
+
+void setup() {
+  Serial.begin(115200);
+  Wire.begin(SDA_PIN, SCL_PIN);
+  if (!bmp.begin(BMP_ADDR_A) && !bmp.begin(BMP_ADDR_B)) {
+    Serial.println("BMP280 not found - check VCC/GND/SDA/SCL, CSB->3V3, SDO->GND");
+  }
+  bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,
+                  Adafruit_BMP280::SAMPLING_X2,    // temperature oversampling
+                  Adafruit_BMP280::SAMPLING_X16,   // pressure oversampling (max)
+                  Adafruit_BMP280::FILTER_X16,     // IIR filter (max smoothing)
+                  Adafruit_BMP280::STANDBY_MS_250);
+
+  NimBLEDevice::init("BaroBalDav");
+  NimBLEServer*  srv = NimBLEDevice::createServer();
+  NimBLEService* ess = srv->createService("181A");                 // Environmental Sensing
+  chPress = ess->createCharacteristic("2A6D",
+              NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY);     // Pressure
+  chTemp  = ess->createCharacteristic("2A6E",
+              NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY);     // Temperature
+  ess->start();
+
+  NimBLEAdvertising* adv = NimBLEDevice::getAdvertising();
+  adv->addServiceUUID("181A");
+  adv->setName("BaroBalDav");
+  adv->start();
+}
+
+void loop() {
+  float pa = bmp.readPressure();       // Pa
+  float tc = bmp.readTemperature();    // deg C (chip temperature)
+
+  uint32_t pv = (uint32_t)lroundf(pa * 10.0f);   // 0.1 Pa units per BLE spec
+  int16_t  tv = (int16_t)lroundf(tc * 100.0f);   // 0.01 C units per BLE spec
+
+  chPress->setValue((uint8_t*)&pv, sizeof(pv)); chPress->notify();
+  chTemp->setValue((uint8_t*)&tv, sizeof(tv));  chTemp->notify();
+
+  Serial.printf("P=%.2f hPa  T=%.2f C\n", pa / 100.0f, tc);
+  delay(1000);
+}
--- a/tools/baro-sensor/emulate_baro.py
+++ b/tools/baro-sensor/emulate_baro.py
@ -0,0 +1,168 @@
+#!/usr/bin/env python3
+# Emulate the "BaroBalDav" sensor on this PC's Bluetooth so the phone's baldav can be tested
+# against the REAL Kotlin BLE read path before the ESP32 arrives. Advertises the standard
+# Environmental Sensing service (0x181A) with Pressure (0x2A6D, uint32 0.1 Pa) and Temperature
+# (0x2A6E, int16 0.01 C), and pushes a simulated pressure that rises and falls so altitude moves.
+#
+# Pure BlueZ D-Bus GATT server (python3-dbus + python3-gi) - no bluetoothctl, no pip installs.
+# Run:  python3 tools/baro-sensor/emulate_baro.py      (Ctrl+C to stop)
+import struct, math, time, sys
+import dbus, dbus.mainloop.glib, dbus.service
+from gi.repository import GLib
+
+BLUEZ = "org.bluez"
+ADAPTER_IFACE = "org.bluez.Adapter1"
+GATT_MANAGER = "org.bluez.GattManager1"
+LE_ADV_MANAGER = "org.bluez.LEAdvertisingManager1"
+DBUS_OM = "org.freedesktop.DBus.ObjectManager"
+DBUS_PROP = "org.freedesktop.DBus.Properties"
+
+ESS_UUID = "0000181a-0000-1000-8000-00805f9b34fb"
+PRESSURE_UUID = "00002a6d-0000-1000-8000-00805f9b34fb"
+TEMP_UUID = "00002a6e-0000-1000-8000-00805f9b34fb"
+
+def find_adapter(bus):
+    om = dbus.Interface(bus.get_object(BLUEZ, "/"), DBUS_OM)
+    for path, ifaces in om.GetManagedObjects().items():
+        if ADAPTER_IFACE in ifaces and LE_ADV_MANAGER in ifaces:
+            return path
+    return None
+
+# ---- GATT application / service / characteristic boilerplate (BlueZ example pattern) ----
+class Application(dbus.service.Object):
+    def __init__(self, bus):
+        self.path = "/dev/baldav/baro"
+        self.services = []
+        dbus.service.Object.__init__(self, bus, self.path)
+    def get_path(self): return dbus.ObjectPath(self.path)
+    def add_service(self, s): self.services.append(s)
+    @dbus.service.method(DBUS_OM, out_signature="a{oa{sa{sv}}}")
+    def GetManagedObjects(self):
+        out = {}
+        for s in self.services:
+            out[s.get_path()] = s.get_properties()
+            for c in s.chars:
+                out[c.get_path()] = c.get_properties()
+        return out
+
+class Service(dbus.service.Object):
+    def __init__(self, bus, index, uuid, primary=True):
+        self.path = "/dev/baldav/baro/service%d" % index
+        self.uuid = uuid; self.primary = primary; self.chars = []
+        dbus.service.Object.__init__(self, bus, self.path)
+    def get_path(self): return dbus.ObjectPath(self.path)
+    def add_char(self, c): self.chars.append(c)
+    def get_properties(self):
+        return {"org.bluez.GattService1": {
+            "UUID": self.uuid, "Primary": self.primary,
+            "Characteristics": dbus.Array([c.get_path() for c in self.chars], signature="o")}}
+
+class Characteristic(dbus.service.Object):
+    def __init__(self, bus, index, uuid, flags, service):
+        self.path = service.path + "/char%d" % index
+        self.uuid = uuid; self.flags = flags; self.service = service
+        self.notifying = False; self.value = []
+        dbus.service.Object.__init__(self, bus, self.path)
+    def get_path(self): return dbus.ObjectPath(self.path)
+    def get_properties(self):
+        return {"org.bluez.GattCharacteristic1": {
+            "Service": self.service.get_path(), "UUID": self.uuid, "Flags": self.flags}}
+    @dbus.service.method(DBUS_PROP, in_signature="s", out_signature="a{sv}")
+    def GetAll(self, iface):
+        if iface != "org.bluez.GattCharacteristic1":
+            raise dbus.exceptions.DBusException("org.bluez.Error.InvalidArguments")
+        return self.get_properties()["org.bluez.GattCharacteristic1"]
+    @dbus.service.method("org.bluez.GattCharacteristic1", in_signature="a{sv}", out_signature="ay")
+    def ReadValue(self, options): return dbus.Array(self.value, signature="y")
+    @dbus.service.method("org.bluez.GattCharacteristic1")
+    def StartNotify(self):
+        self.notifying = True
+        print("  [%s] StartNotify" % self.uuid[4:8])
+    @dbus.service.method("org.bluez.GattCharacteristic1")
+    def StopNotify(self):
+        self.notifying = False
+        print("  [%s] StopNotify" % self.uuid[4:8])
+    @dbus.service.signal(DBUS_PROP, signature="sa{sv}as")
+    def PropertiesChanged(self, iface, changed, invalidated): pass
+    def set_value(self, raw):
+        self.value = [dbus.Byte(b) for b in raw]
+        if self.notifying:
+            self.PropertiesChanged("org.bluez.GattCharacteristic1",
+                                   {"Value": dbus.Array(self.value, signature="y")}, [])
+
+# ---- LE advertisement ----
+class Advertisement(dbus.service.Object):
+    def __init__(self, bus, index):
+        self.path = "/dev/baldav/baro/adv%d" % index
+        dbus.service.Object.__init__(self, bus, self.path)
+    def get_path(self): return dbus.ObjectPath(self.path)
+    @dbus.service.method(DBUS_PROP, in_signature="s", out_signature="a{sv}")
+    def GetAll(self, iface):
+        if iface != "org.bluez.LEAdvertisement1":
+            raise dbus.exceptions.DBusException("org.bluez.Error.InvalidArguments")
+        return {
+            "Type": "peripheral",
+            "ServiceUUIDs": dbus.Array([ESS_UUID], signature="s"),
+            "LocalName": dbus.String("BaroBalDav"),
+            "Includes": dbus.Array(["tx-power"], signature="s"),
+        }
+    @dbus.service.method("org.bluez.LEAdvertisement1")
+    def Release(self): print("Advertisement released")
+
+# ---- pressure/temperature simulation ----
+def enc_pressure(pa): return struct.pack("<I", round(pa * 10))   # uint32, 0.1 Pa
+def enc_temp(tc):     return struct.pack("<h", round(tc * 100))  # int16, 0.01 C
+
+def main():
+    dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+    bus = dbus.SystemBus()
+    adapter = find_adapter(bus)
+    if not adapter:
+        print("No BLE adapter with GATT+Advertising found"); sys.exit(1)
+    print("adapter:", adapter)
+
+    app = Application(bus)
+    svc = Service(bus, 0, ESS_UUID, True)
+    press = Characteristic(bus, 0, PRESSURE_UUID, ["read", "notify"], svc)
+    temp = Characteristic(bus, 1, TEMP_UUID, ["read", "notify"], svc)
+    svc.add_char(press); svc.add_char(temp); app.add_service(svc)
+
+    gatt = dbus.Interface(bus.get_object(BLUEZ, adapter), GATT_MANAGER)
+    adv_mgr = dbus.Interface(bus.get_object(BLUEZ, adapter), LE_ADV_MANAGER)
+    adv = Advertisement(bus, 0)
+
+    t0 = time.time()
+    def tick():
+        t = time.time() - t0
+        # sea-level-ish pressure that swings ~600 Pa (~ +-50 m) with a ~60 s period, so altitude moves
+        pa = 101325.0 - 600.0 * math.sin(t / 10.0)
+        tc = 24.0 + 0.5 * math.sin(t / 25.0)
+        press.set_value(enc_pressure(pa))
+        temp.set_value(enc_temp(tc))
+        if int(t) % 5 == 0:
+            print("  sim: P=%.1f Pa (%.2f hPa)  T=%.2f C" % (pa, pa/100.0, tc))
+        return True
+    tick()
+
+    def reg_ok(): print("GATT application registered")
+    def reg_err(e): print("GATT register error:", e); mainloop.quit()
+    def adv_ok(): print("Advertising as 'BaroBalDav' (service 0x181A)")
+    def adv_err(e): print("Advertising error:", e); mainloop.quit()
+
+    gatt.RegisterApplication(app.get_path(), {}, reply_handler=reg_ok, error_handler=reg_err)
+    adv_mgr.RegisterAdvertisement(adv.get_path(), {}, reply_handler=adv_ok, error_handler=adv_err)
+
+    GLib.timeout_add(1000, tick)
+    mainloop = GLib.MainLoop()
+    print("BaroBalDav emulator running - connect from the phone. Ctrl+C to stop.")
+    try:
+        mainloop.run()
+    except KeyboardInterrupt:
+        print("\nstopping")
+        try: adv_mgr.UnregisterAdvertisement(adv.get_path())
+        except Exception: pass
+        try: gatt.UnregisterApplication(app.get_path())
+        except Exception: pass
+
+if __name__ == "__main__":
+    main()
--- a/tools/baro-sensor/platformio.ini
+++ b/tools/baro-sensor/platformio.ini
@ -0,0 +1,20 @@
+; BalDav BLE barometer - ESP32-C3 SuperMini + BMP280
+; Build & flash over USB, no Arduino IDE:
+;   pip install platformio        (once)
+;   pio run -t upload             (compile + flash via USB-C)
+;   pio device monitor            (optional: see logs)
+; ESP32-C3 flashes over its native USB. If upload can't find the port the first time:
+; hold BOOT (GPIO9), tap RESET, release BOOT -> it enters download mode, then retry upload.
+
+[env:esp32-c3-supermini]
+platform = espressif32
+board = esp32-c3-devkitm-1
+framework = arduino
+monitor_speed = 115200
+; native USB-CDC so the board enumerates as a serial port over its own USB-C
+build_flags =
+    -D ARDUINO_USB_MODE=1
+    -D ARDUINO_USB_CDC_ON_BOOT=1
+lib_deps =
+    adafruit/Adafruit BMP280 Library @ ^2.6.8
+    h2zero/NimBLE-Arduino @ ^1.4.1
--- a/tools/baro-sensor/src/main.cpp
+++ b/tools/baro-sensor/src/main.cpp
@ -0,0 +1,61 @@
+// BalDav BLE barometer: ESP32-C3 SuperMini + BMP280.
+// Reads the BMP280 over I2C at max oversampling (+IIR filter) and broadcasts pressure and
+// temperature over BLE as the standard Environmental Sensing service, ~1 Hz. baldav reads it
+// via noble like the HR strap and turns pressure into altitude (using the temperature for the
+// hypsometric correction). It advertises continuously (no deep sleep) so a USB power bank does
+// not cut off on an idle load; current is dominated by the radio, the barometer is negligible.
+#include <Wire.h>
+#include <Adafruit_BMP280.h>
+#include <NimBLEDevice.h>
+
+static const int  SDA_PIN  = 3;   // BMP280 SDA -> GPIO3
+static const int  SCL_PIN  = 4;   // BMP280 SCL -> GPIO4
+static const uint8_t BMP_ADDR_A = 0x76; // SDO->GND
+static const uint8_t BMP_ADDR_B = 0x77; // SDO->3V3 (fallback)
+
+Adafruit_BMP280 bmp;
+NimBLECharacteristic* chPress;   // 0x2A6D Pressure,    uint32, units 0.1 Pa
+NimBLECharacteristic* chTemp;    // 0x2A6E Temperature, int16,  units 0.01 C
+
+void setup() {
+  Serial.begin(115200);
+  Wire.begin(SDA_PIN, SCL_PIN);
+  if (!bmp.begin(BMP_ADDR_A) && !bmp.begin(BMP_ADDR_B)) {
+    Serial.println("BMP280 not found - check wiring (VCC/GND/SDA/SCL, CSB->3V3, SDO->GND)");
+  }
+  // Max pressure oversampling + max IIR filter = lowest noise. We sample ~1 Hz, so the extra
+  // conversion time costs microamps - nothing next to the BLE radio.
+  bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,
+                  Adafruit_BMP280::SAMPLING_X2,    // temperature oversampling
+                  Adafruit_BMP280::SAMPLING_X16,   // pressure oversampling (max)
+                  Adafruit_BMP280::FILTER_X16,     // IIR filter (max smoothing)
+                  Adafruit_BMP280::STANDBY_MS_250);
+
+  NimBLEDevice::init("BaroBalDav");
+  NimBLEServer*  srv = NimBLEDevice::createServer();
+  NimBLEService* ess = srv->createService("181A");                 // Environmental Sensing
+  chPress = ess->createCharacteristic("2A6D",
+              NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY);     // Pressure
+  chTemp  = ess->createCharacteristic("2A6E",
+              NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY);     // Temperature
+  ess->start();
+
+  NimBLEAdvertising* adv = NimBLEDevice::getAdvertising();
+  adv->addServiceUUID("181A");
+  adv->setName("BaroBalDav");
+  adv->start();
+}
+
+void loop() {
+  float pa = bmp.readPressure();       // Pa
+  float tc = bmp.readTemperature();    // deg C (chip temperature)
+
+  uint32_t pv = (uint32_t)lroundf(pa * 10.0f);   // 0.1 Pa units per BLE spec
+  int16_t  tv = (int16_t)lroundf(tc * 100.0f);   // 0.01 C units per BLE spec
+
+  chPress->setValue((uint8_t*)&pv, sizeof(pv)); chPress->notify();
+  chTemp->setValue((uint8_t*)&tv, sizeof(tv));  chTemp->notify();
+
+  Serial.printf("P=%.2f hPa  T=%.2f C\n", pa / 100.0f, tc);
+  delay(1000);
+}
Author	SHA1	Message	Date
4aiman	eb430ffb78	ui: bulk-delete tracks, HR/VR record + detail layout - Tracks list: the long-press multi-select (used for merge) now also offers Удалить - bulk delete of the selected tracks (1+; merge still needs 2+), same selection flow. - HR/VR record screen: heart rate fills the main area (like the map on a GPS ride), Подключить/Стоп moved into a bottom bar, consistent with the GPS screen. - HR/VR workout detail: 'Удалить зарядку' pinned to the bottom (was floating in the scroll flow and stretched).	2026-10-30 23:07:53 +03:00
4aiman	9251c1dd90	ble: barometer on its own connection - simultaneous HR+baro, auto-connect, UI Separate BleBaroService so the HR strap and the barometer each hold their own GATT link and work at the same time (one adapter, several LE connections). Verified on device against a PC BlueZ emulator of the sensor: BleHR and BleBaro deliver in parallel, no cross-talk. - BleBaroService: dedicated baro connection (scan-before-connect + direct-connect fallback, ESS subscribe, writes ble_baro_data.json). MainActivity routes baro connects to it and auto-connects both HR (ble_device.json) and baro (baro_device.json) at start. - Rust: ble_baro_disconnect, ble_save_baro_device. - Settings: a 'Датчики (BLE)' section - heart-rate and barometer as separate rows with their own slots, bind/connect/unbind, and a live pressure/temperature/altitude readout. - Tracking: altitude_baro_m stored per point, preferred in elevation stats (null without baro). - Record screen: 'Высота' from the barometer (1 Hz, dot marker), temperature from the sensor. - Fixes: direct-connect on scan timeout; Locale.US JSON (RU decimal comma broke the parse); parsing routed by characteristic (baro no longer written into the pulse); VR/HR stop returns to the tracks list instead of into details. - tools/baro-sensor/emulate_baro.py: PC BlueZ peripheral that emulates the sensor for testing. Emulator-verified only; real board still pending.	2026-10-30 22:46:26 +03:00
4aiman	82f3dc9d4a	ble: read DIY barometer (BaroBalDav) over BLE + firmware Self-made altitude sensor: ESP32-C3 SuperMini + BMP280 broadcasting pressure and temperature over standard BLE Environmental Sensing. Read into baldav the same way as the heart-rate strap (Kotlin BLE service -> file -> Rust -> JS), new device_type 'baro'. - BleHrService: 'baro' type subscribes to ESS 0x181A (pressure 0x2A6D uint32 0.1 Pa, temperature 0x2A6E int16 0.01 C), writes ble_baro_data.json + ble_baro_log.jsonl. Every baro branch is gated by deviceType=='baro', so HR/GPS paths are untouched. - ble.rs: BaroReading, ESS detection, ble_get_baro command (Android reads the file, desktop returns None). Registered in lib.rs. - frontend/js/baro.js: passive window.BARO - hypsometric pressure->altitude using the sensor temperature, anchored to GPS altitude at ride start. Nothing runs until BARO.start(), so with no barometer the app is unchanged. - tools/baro-sensor: firmware (PlatformIO main.cpp + Arduino sketch) that reads BMP280 at max oversampling and advertises the ESS service. Prep only: no hardware yet, verified by compile (build 0.1.538). Live wiring and ride-track integration pending the board.	2026-10-30 00:38:12 +03:00
4aiman	1101016ef4	hydration: spoken 'hydrate now' alert, per-activity sweat, drink reconciliation - signal is now a loud TTS 'hydrate now' on the ALARM stream (TTS warmed at session start), so it is unmistakably BalDav and audible when the phone is not in view (walking/VR); the old ringtone was indistinguishable from a system alarm. - sweat need scales by activity instead of a flat 600 ml/h: bike 600, walk 200, run 450, workout/vr 250 ml/h. Walking no longer nags every 15 min. - deficit split into baseDeficit (seeded from the food log) + accrued sweat; logging a drink mid-session recomputes the base and re-seeds via seedSeq, so it silences the reminder. seedSeq=0 (profile save / init) never zeroes it mid-ride. - persistent 'БалДав: попей воды (HH:MM)' notification left as a record.	2026-10-27 21:47:10 +03:00