Each android build now removes the regenerable AAB bundles
(intermediary_bundle, outputs/bundle) and gen APK copies once the final
APK is in binaries/; a manual 'clean' target does the same on demand.
Frees ~0.5G/cycle without touching the Rust incremental cache or
binaries/. (build.sh stays untracked - it holds a deploy secret; this
documents the change.)
New ⊕ button on the recording screen toggles map auto-follow. When off,
the map stays put so you can look around when unsure where you are (off
the track, or the track leads where there is no road); new GPS points no
longer recentre it. Tapping it back on recentres on the current position
and resumes following. Default on per screen entry (not persisted).
Guards followMode around panTo/setView in onPoint/onBatchUpdate/
onStateChange. Independent of the compass freeze/rotate controls.
Stage 1 of the nogo/reroute work. Mark impassable circles that BRouter routes
around, end to end:
- DB nogo_areas table + CRUD; drawNogoAreas() red circles (tap to remove).
- BRouter.route(points, profile, nogos): &nogos=lon,lat,r on the RouteServer and
nogos in the embedded-engine request; Rust brouter_route passes it through;
Kotlin builds OsmNodeNamed(radius,isNogo,nogoWeight=NaN) -> rc.nogopoints +
prepareNogoPoints (needs an APK rebuild for offline use).
- Planner: ⛔ button toggles nogo-placement (tap map/line), each leg re-routes
around nogos. Recording map: ⛔ marks the current spot impassable. Detail map
shows the circles.
Verified the RouteServer detours around a nogo (2873m -> 3329m).
- Editor shows the route with casing + slope/elevation colouring like the detail
view (drawRoutePolyline over the routed geometry); day/night, slope/elev and
locate controls added. Root cause of the plain thin line: ele was dropped when
building leg geometry — now kept from BRouter, so casing/slope work here and in
showRouteDetail. Straight legs (no ele) stay a thin line.
- Insert a point is now a TAP on the line (fat invisible hit target,
pointer-events:stroke); long-press toggles road/straight.
- Routes store editable waypoints (routes.waypoints_json {waypoints,legMode})
alongside the dense geometry, so re-editing shows the 5-6 points, not thousands.
- Bottom bar reworked (.re-bottom): hint on top, buttons in a row, cancel below.
- Gap-fill is conservative: only real long dropouts (dt>60s, chord>150m), skips
big detours (>2x chord) and no-gain fills (road ~ straight).
Gap-fill (track detail): GPS.fillGaps now returns {points,gaps} with per-gap
status; the 🧩 control previews ONLY the filled dropouts (cyan casing; unfilled
= red dashed) with a Save/Cancel panel. Save is a reversible in-place patch
(estimated points added, original untouched; DB.saveGapFill/revertGapFill +
estimated/gap_filled columns), then recalculateSession. Revert removes them.
Route planner: renamed menu 'Нарисовать маршрут' → 'Нарисовать тренировку'
(it makes a workout session, not a route); routes empty-state now points at the
on-phone planner. showRouteEditor rewritten per-leg: each leg road (BRouter) or
straight independently, road by default, tap a leg to toggle it, long-press to
insert, silent straight fallback where no road; the global button sets all legs.
doBrouter() ended with changed(), which nulled routeGeom and re-queued
doBrouter — an endless re-route loop where the road line was never drawn
(editor kept the straight line, distance unchanged). Draw directly instead
(updatePolyline/updateStats).
Verified end-to-end in the UI on a virtual display (Xvfb) against the
RouteServer: editor 'По дорогам' turns a 1.69km straight line into a 2.25km
road-following route; the gap-fill '🧩' overlay draws a shortest-road cyan
dashed line across a track's GPS dropouts. Docs (README/PROJECT_MAP/plan/log)
updated to match; router.js/poi.js now listed in PROJECT_MAP.
Analysis in docs/brouter-findings.md: how BRouter knows roads (.rd5
segments), routes and reaches low elevation gain (profile uphill/downhill
cost + kinematics), the three call surfaces, and an evaluation of two ideas
— fill GPS gaps along roads, and offline waypoint route planning. License is
MIT; the engine has no desktop-only deps, so it embeds on Android ART.
Stage 1 (embed + bridge, compiles into the apk; on-device route not yet run):
- vendored brouter-1.6.3-all.jar into the Android module (dexes cleanly) and
bundled the trekking/shortest profiles + lookups.dat as assets, copied to
files/brouter/profiles2 on launch
- MainActivity: a brouter_command.txt handler on the existing FileObserver
runs btools.router.RoutingEngine off the UI thread (recipe taken via javap
from ServerHandler) and returns the track as GPX
- Rust brouter_route command: same file bridge as GPS (request + command,
poll for the result), registered in the invoke handler
- frontend/js/router.js: BRouter.route(points, profile) -> GPX (parseRouteGPX)
- LICENSE-brouter (MIT notice) kept alongside the vendored engine
Segments (.rd5, ~13-23 MB per 5x5 tile) are delivered later (Stage 2, wired
download inside BalDav). IMPLEMENTATION_PLAN.md tracks the 5 stages.
Variant 5 from the findings doc, as GROUND TRUTH for validating the
from-track wind estimate — it does NOT feed kcal/power. Chosen scope
(per user): a toggle button now, binary "in the face" only, voice later.
- rec screen button "Ветер в лицо": tap opens a headwind interval, tap
closes it; the open state is highlighted and survives a screen re-render
- GPS.toggleWindMark()/_closeOpenWindMark(); recording.windMarks =
[{startTs,endTs}] ms, persisted to localStorage, written to the DB on
finish and restored on crash recovery (a dangling interval auto-closes)
- gps_sessions.wind_marks (JSON) + DB.setSessionWindMarks (separate from
finishGpsSession so recompute paths preserve marks); parsed in getGpsSession
- rec-bottom wraps now so the third button never overflows a narrow screen
Analysis (marks vs estimate) stays in tools/track once enough km accumulate.
Acted on docs/gps-model-findings.md (independent analysis of 156 rides).
Implemented:
- crrFromAccel extended past the old 0.008 ceiling: 7-11 -> 0.008,
11-15 -> 0.012 (packed dirt), >15 -> 0.020 (grass/rut/gravel). Rough
surfaces were undercounted ~3x. Applied to session median and per-point Crr.
- Auto walk-the-bike detection (single-speed only, gear_count 1/unset):
a normal-fix segment slower than the 30-rpm-cadence speed is the rider
pushing, not riding. Excluded from ride distance/speed/elevation (elevRef
reset so a pushed climb doesn't merge with the ridden one); effort counted
as walking, not bike physics. Every sub-threshold point excluded regardless
of duration; only runs >=30s reported as walked (walkBikeSec/walkBikeMeters).
gearCount threaded through every computeStats/finish caller.
Documented as known limitations (left as-is by decision, need calibration/DEM):
- kcal max(physics, MET) never sums the biological overhead, so climbs are
slightly undercounted (comment + README + PROJECT_MAP).
- absolute elevation gain is bounded by the raw GPS altimeter (tens of
percent; needs a terrain model / wired DEM preload).
Manual pause (hand-paused at foot of a climb, walked up, resumed) was
counted as riding: computeStats bridged the GPS gap for distance and
elevRef survived the gap, leaking the on-foot climb into elevation gain.
- gps_sessions.pauses (JSON) now persists manual-pause intervals
- computeStats(opts.pauses): a segment crossing a pause is excluded
entirely (no distance/speed/elevation/kcal), elevRef reset, paused
time subtracted from duration; automatic GPS gaps still interpolated
- altitude glitch guard: an adjacent smoothed step steeper than
maxRealGradePct (100% = 45deg) is not banked and does not move elevRef
(covers Android no-fix 0.0); a smooth change to any value (a real 0
near a river) still passes
- recorder writes "alt":null when hasAltitude() is false (real fixed 0 kept)
- pauses threaded through live-stop, recalculateSession, recovery and bulk recompute
- new-tracks only (old tracks never stored pauses; no manual segment-cut UI)
Also: track-detail header shows a click-to-copy track ID.
Two-pass extractor for the steepest sections of recorded bike tracks:
- pulls gps_points/gps_sessions from baldav.db (adb run-as), bike only;
- refines elevation online (--gpxz Copernicus GLO-30 with the user's key, deduped
to ~33m cells + cached; falls back to open-elevation / on-device altitude_srtm_m);
- distance-window smoothing, grade over a configurable base (default 120m) with a
GPS-gap guard, keeps the steepest base-window core per section (so a real steep
core is not averaged away by a long gentle stretch), spatial de-dup of repeats;
- outputs steep_segments.gpx (named by grade/length/drop) + a brouter lonlats string.
Verified against two ground-truth spots the rider confirmed; open-elevation/SRTM30
flatten short steep features that GLO-30 resolves. Key + data stay gitignored.
- ChZ module (frontend/js/chzn.js): import an anonymous session (exported from
the CRPT app with tools/chzn_export.sh) and keep it alive via /authorize/refresh
— /authorize/anonymous is Play Integrity-gated so BalDav can't mint its own.
GS1 code normalization (reconstruct the GS separator before AI 93), check ->
catalogData good_attrs КБЖУ parser (match by attr group + name prefix, since
producers name the fields differently), optional nutrition/info vitamins.
- chzn_http Rust command: browser UA + returns {status,body} so 204/401/427 drive
the session/refresh logic.
- Scanner modal (BarcodeDetector camera + photo/manual fallbacks) -> prefill the
new-product form; CAMERA permission; settings section to import/refresh session.
- tools/chzn_export.sh: pull + validate the anonymous session from a rooted device.
The direction triangle jumped around in GPS mode: rotation was set to the geo
heading with rotateWithView adding map._bearing, and the two desynced (they
should cancel in course-up but updated at different times). Since the map already
rotates the active heading to the top, travel direction is always screen-up —
so just point the triangle up (no rotateWithView, no per-frame rotation), shown
whenever a heading is known. Compass mode still to be tested.
- searchProducts: order-independent token AND (every whitespace word must appear
in name, any order), ranked full-substring > prefix > length. Fixes needing to
type words in the name's order.
- Cleanup of unlabeled junk (health-diet/ashan/fast-food, null source): keep-list
= magnit,5ka,ion,kdv,manual,recipe_import,gridnev. DB.cleanupUnlabeledProducts
deletes non-keep AND unused (food_log/recipe_ingredients protected); Settings
button 'Очистить продукты без магазина' with a counted appConfirm.
- Seed products_seed.db cleaned: 24443 -> 13008 (non-keep removed), seed_meta
version 10 -> 11, VACUUM (13.5MB -> 8.9MB). So future imports don't re-add junk.
On-device 11207 unused non-keep will be removed via the button (24 eaten stay).
- One direction indicator instead of two geo-arrows: an SVG divIcon L.marker
(rotateWithView) — a track-colored circle (20% darker) with white + 1px black
rings, plus a triangle pointing the ACTIVE source heading (compass in compass
mode, GPS course in GPS mode). Rotation = geo heading; rotateWithView keeps it
correct as the map turns. Replaces posMarker + compass/course arrows.
- Z-order via panes: roads -> roadsPane(240), route routePane(250), track
overlay(400), puck markerPane — tiles<roads<route<track<puck (track no longer
hidden under roads).
- Mini-compass shown only in compass mode; tap-to-calibrate kept.
- darkenHex helper; .rec-puck css (no default div-icon box).
Exclude real GPS fixes coarser than the "Макс. погрешность GPS" setting
(minAccuracyM) from a track's stats and its drawn line. Non-destructive: the
points stay in the DB, so raising the threshold brings them back.
- GPS.filterByAccuracy(points, threshold?): drops points with a measured
accuracy above the threshold; always keeps points without accuracy (imported
GPX/FTB, older recordings) and estimated dead-reckoning fills (sentinel >=999).
- Wired into GPS.computeStats (top) so every recompute path funnels through it —
the "Пересчитать" button, "Пересчитать всё", and the post-de-jitter recompute.
Also into GPS.filterNoise so the detail-screen line matches the stats.
- Removes mild jitter detours that the spike filter misses (verified: 342 -> 334m
when a poor-accuracy nudge is dropped). Lower the threshold + Пересчитать to
apply; raise it to undo.
- Route editor (showRouteEditor): create ("Новый маршрут") or edit an existing
route's geometry in-app — tap to add, drag a point to move, tap a point to
delete. Save: new prompts a name (addRoute), edit rewrites points_json
(updateRoutePoints; drops stale elevations, re-fetch from the preview).
- Slope colouring in discrete 1% bands (green→yellow→red→brown→black, ≥10% black)
instead of degree buckets; colour-strip legend (slopeLegendHtml).
- Diagnostic logs compiled-in but silenced in release: get_app_info now returns
debug = cfg!(debug_assertions); JS installs a console.log filter that drops
lines starting with a diagnostic tag ([poll]/[recover]/[stop]/[GPS]/[HR]/[SD])
in release only. No more hand-adding/removing logs.
- Fix: saved-route overlay was invisible on the recording (rotating) map — it
flashed on pinch-zoom then vanished. leaflet-rotate keeps tile/overlay panes
inside _rotatePane, but the commented-out createPane override meant our custom
routePane attached to mapPane (outside rotation). Now parent routePane to
map._rotatePane when present; non-rotating maps unchanged.
See how hilly a hand-drawn route is BEFORE riding it.
- parseRouteGPX reads <ele>; GPS.routeElevStats computes cumulative distance,
grade-to-next, ascent/descent (1m hysteresis) and max grade over smoothed
elevations (filterAndSmoothAlt kills SRTM vertical noise).
- Route preview screen (tap a route name): map with a wide colored casing +
tappable altitude/grade points, elevation profile chart (steep >8% in red),
length/ascent/descent/max-grade, fullscreen expand/collapse.
- Casing colored by slope (deg: lime <2, yellow 2-4, red 4-6, black >6) or by
elevation (green->yellow->brown), toggled with an on-map ∡/⛰ button. Casing
drawn in a dedicated pane below the overlay pane, so a recorded track stays on
top; the same toggle is on the track-detail map too.
- fetchElevations tries, in order: GPXZ (Copernicus GLO-30, key from GPS
settings — stored in localStorage, never in git) -> open-elevation (SRTM) ->
open-meteo -> OpenTopoData (keyless). Import auto-fetches elevations.
- db.js: updateRoutePoints persists fetched elevations into points_json;
getRoutes reports hasEle. Route points are now {lat, lon, ele?}.
Native prompt at route import replaced with in-app appPrompt.
Fixes to the smoothing/routes UI reported on device:
- Blank detail after save/revert: showSessionDetail was called from inside the
open detail modal, stacking a second overlay; querySelector("#sd-map") then
hit the stale, already-initialized Leaflet map and threw, aborting the rest
of the render (map + speed chart). New reopenDetail() closes the current
detail (and its fullscreen-map child) and reopens fresh, like recalc/refine.
- Native confirm()/prompt() replaced with in-app appConfirm/appPrompt dialogs
(winStack + history integrated, hardware back cancels). Used for smoothed
save, route delete, route rename.
- Slow smoothed save: one UPDATE per point (4000+ IPC round-trips) replaced
with a chunked CASE update — 18 statements for 4366 points, params kept
under SQLite's 999 limit. Verified value-for-value on a copy DB.
- Closing the fullscreen map now also closes the smoothing panel (it is a
fixed element that otherwise lingered over the collapsed map).
- "≈" button active state now reflects panel-open only, not session.smoothed
(it looked permanently pressed after a save).
Docs: README + PROJECT_MAP updated for saved routes, de-jitter, accuracy_m,
routes table and new gps_points/gps_sessions columns. Version 0.1.393.
On stretches where the fix rate drops (dt > gapThresholdSec, incl. dead-
reckoning) the straight chord mis-measures the path, so computeStats now
estimates gap distance by avg(speed)*dt (capped at max speed; a tiny chord
over a long gap means the rider was stopped and the reported speed is stale
-> trust the position). A fast jump WITHOUT a time gap is a teleport glitch
and is dropped. Distance now depends only on ts + speed, not on the
`estimated` flag (which live points carry but DB rows don't), so the live
counter, Stop and recompute finally agree. Verified on a real ride: at
gapThreshold=30 -> 35.7 km / 1024 kcal (map-measured ~35 km); clean tracks
without gaps unchanged.
Settings: read GPS config on input+change (reliable on mobile), add a
"Save GPS settings" button and a "saved" toast so it's clear the value
persisted; changing gapThreshold + recompute now visibly applies.
- native_root(): pick app root by presence of gps_live/gps_points files.
app_data_dir() is the root directly on this Tauri; the old .parent().parent()
read the wrong dir, so background (screen-off) points were never imported.
- recoverFromFiles: match file->session by id/date, plus session id stamped
into the native file name (gps_points_<ms>_s<id>.jsonl) for exact binding
(gps_set_session_id -> Kotlin bindSessionIfPending). Proximity dedup +-2.5s,
recalc with noDelete (never runs the destructive glitch/>24h filter that
once wiped real rides), delete already-imported files. Progress bar UI.
- bike kcal is NET (daily balance already books BMR*activityLevel): pedaling =
max(physics power/efficiency, MET-net by speed), coasting (power<=0, the bike
would roll unpowered) = basal only. Elevation via cumulative hysteresis.
recomputeAllStats + "recompute elevation/kcal" menu refresh stored tracks
without touching points.
- live recording: the native file is the DB source of truth; watchPosition
only drives the live marker, so a fix is not stored twice with two timestamps.
- track list pagination, SAF local-file picker, tile regions from router.
- applyBearing: use h, not h - rotOffset. The .rec-screen (map + panel) is
CSS-rotated by rotOffset in landscape and setBearing adds another rotate on
the map pane; subtracting rotOffset cancelled the screen rotation for the
map only, gluing course to the portrait top edge while the panel turned.
Using h lets the map turn with the screen -> course points to physical top.
- Poll: guard the requestAnimationFrame yield with !document.hidden. rAF never
fires while the screen is off, so awaiting it there hung the import loop and
froze point import mid-walk (regression from the progressive-draw change).
- recoverSession: import missing native points by the SET of existing
timestamps instead of ts > maxDbTs. Sparse screen-gated points can have a
late max ts, so the old check imported nothing and left the track full of
gaps; also pass sensorData so bearing/accel/gyro are stored.
Regression from per-session points file change (1feb2ef): the service
returns START_STICKY, so when the OS kills it during screen-off, it
restarts with a null intent and onStartCommand minted a NEW points file,
repointing gps_live_points.jsonl and orphaning accumulated background
points. Evidence: many tiny orphaned gps_points_*.jsonl fragments.
Fix: onStartCommand creates a new session file only on a genuine start
from JS (intent with extras). A START_STICKY restart (null intent) keeps
writing to the existing session file from the pointer — one file per
session until Stop.
Verified on device: am kill (= START_STICKY restart) no longer creates
a new file, pointer unchanged, trail resumes on return. Background
writing confirmed: 49 points in 70s with screen off (Dozing) at 1Hz.
Compass:
- Gimbal lock compensation: when phone tilts past horizontal (|beta|>90
in landscape, |gamma|>90 in portrait), heading flips 180 — compensated
- EMA smoothing for heading (factor 0.3, ~300ms settle) — reduces jitter
from road bumps while keeping responsive turns
- 3 orient modes: X(off) A(auto) L(lock) — lock freezes layout, compass
still works with gimbal compensation
- Debug overlay on map shows alpha/beta/gamma/heading/mode
Build:
- ./build.sh install — install last APK without building
- ./build.sh -d install — install debug APK
- install_apk respects -d flag for debug/release selection
Products:
- health-diet.ru scraper (Tampermonkey) + import script
- 11469 products with 37 nutrients, Dodo 258, McDonalds 619, KFC 361, Ashan 2000
- Rust import_seed_products: dynamic column list, auto-create missing columns
- Seed version bumped to 10
GPS session safety:
- Separate gps_points_{ts}.jsonl per session, deleted only after DB save
- Toast on DB errors, NaN guard in finishGpsSession
Other:
- build.sh: router/VPS upload only with -u flag
- Orientation buttons bottom-right, weather via Yandex Pogoda
Settings:
- Aero drag (CdA), air density, pedal efficiency now in GPS config
- Human-readable names: "Аэросопротивление", "Плотность воздуха", "КПД педалирования"
- Saved to localStorage, used in computeStats
Bug fixes:
- Recipe detail: overlay.remove without popHandler cleanup → now uses history.back()
- weightKg parseFloat in startRecording and importGPX (string "88" bug)
- profile.weight_kg stored as number not string
- getDailyActivityTotals: separate params for UNION ALL subqueries
Docs:
- PROJECT_MAP.md — full project structure, DB schema, screens, formulas
- README.md — overview, build instructions, data sources
